Sign in with
Sign up | Sign in
Your question

Zenith desktop troubleshooters

Last response: in Windows XP
February 16, 2010 10:50:57 AM

my zenith desktop says NTLDR is missing..wat do i do?
February 18, 2010 1:53:37 AM

If you get the "NTLDR is Missing" error, follow these instructions:

1. Load Windows XP CD into CD drive.
2. Make sure BIOS is set to boot to CD drive.
3. Boot the computer from CD.
4. At menu, press "R" to load Recovery Console.
5. Select the installation to be fixed.
*The following instructions assume CD-ROM is labeled as drive D and the hard drive partition the windows installation is on is labeled as drive C. Replace the letters accordingly.
6. Type "COPY D:\i386\ntldr C:\" and press ENTER.
7. Type "COPY D:\i386\ C:\" and press ENTER.
8. Remove CD and type "EXIT" and press ENTER (to reboot your computer).