thermal sensors

[Felcore99]

Hi everyone in my new build i have six thermal sensors i was wondering if anyone could explain to me how to properly place them on the CPU, GPU, HDD and MB. thanks for your help

David

 

[systemlord]

Congrats on your new PC build. One of the best ways to apply a thermal senser is singlesided sticky tape, and since you have three already built into the Processer & one on the graphics cards you can place them near any component to get the surrounding air temp to eliminate hot spots inside you PC case.

You can put one on the surface of the HD or one on/or by the power supply. Speed Fan can monitor CPU, core temps, HD, mobo temps. Here the link for Speed Fan.www.majorgeeks.com/Speedfan_d337.html

 

[Felcore99]

Thank you very much for the info. I should have been a little more specific 3 of the sensors are connected to a display on my case i would like to connect them to the CPU, GPU and HD where is a safe place to put them. Thank you again for your help

David

 

[evongugg]

You can tape the HD sensor to the underside of the HD.
Tape the CPU sensor on the motherboard in the CPU area.
Tape the GPU on the motherboard close the fan of the GPU.

 

[Felcore99]

Awsome thank you very much

David