Sign in with
Sign up | Sign in
Your question

New build help

Last response: in Applications
Share
May 9, 2012 11:45:35 PM

Hi guys. Not sure if this is the right forum to post this in, but I'll try. I am working on my first build. I have it all put together and I am trying to run the disk for the motherboard. I'm getting error code E0441203. Application failed to initialize. I've Googled around a bit, but... The build is not connected to the internet because the network adapter drivers are on it I guess. I read something about it may be a Windows update issue, Direct X, etc... Here are my specs. Thanks! :) 

Video card http://www.newegg.com/Product/Product.aspx?Item=N82E168...
PSU http://www.newegg.com/Product/Product.aspx?Item=N82E168...
Motherboard http://www.newegg.com/Product/Product.aspx?Item=N82E168...
Operating System http://www.newegg.com/Product/Product.aspx?Item=N82E168...
Hard Drive http://www.newegg.com/Product/Product.aspx?Item=N82E168...
CPU http://www.newegg.com/Product/Product.aspx?Item=N82E168...
Memory http://www.newegg.com/Product/Product.aspx?Item=N82E168...
Optical Drive is some Asus model, can't remember.

More about : build

May 10, 2012 5:30:01 PM

Congratz on your first build!

I suggest a couple things if you haven't tried yet.

First, I would suggest downloading your current motherboard drivers on another computer along with another internet browser and antivirus. Plop them on a USB stick and then install the drivers individually on your new computer from the usb drive.

I tend to never use the included software on the disc that comes with the motherboard. Mainly because the drivers are out of date, and I don't like using the added junkware that comes along with the disc.

Good luck mate, hope that helps.
m
0
l
!