question about the vdroop mod

[swiftyy]

so i just did my vdroop mod.

vcore in bios is 1.3625
cpu-z idle 1.344
cpu-z load 1.344

if I run the pencil over it some more I get
cpu-z idle 1.344
cpu-z load 1.352

Am I trying to get the load temp as close to the vcore in bios? are am I trying to get the idle and load temps the same?

Thanks for your help

 

[mrmez]

Not rly
Ur trying to get the idle and load temps as close as possible.
The drop from bois to what some prog says isnt TOO important
For example...
My q6600 @ 2.7 = 1.15Bios =
1.11 Idle
1.09 Load

 

[swiftyy]

so right now, since my idle is at 1.344 and my load is at 1.344 then I'm good right and don't need to make any other adjustments?