E6600 stock temperatures

jj14

Distinguished
Apr 12, 2006
114
0
18,690
Hi! I have a E6600 with Ultra 120 Extreme on a ASUS P5W DH (in an Antec 900 case with Crucial 4x1GB 4-4-4-12 2.2V) - stock speed at this time.
Spedfan 4.32 reports CPU at 26C, but also shows Core0 at 42C and Core 1 at 43C (on an average) - Is this normal for stock - idle?
When I overclock it, I've read that as long as my CPU temp stays below about 55C (60C max), it is ok - what about the core0/1 temps though? What Core0/1 temps are 'acceptable' while overclocking the E6600 to say 3Ghz?

Thanks!
 

jj14

Distinguished
Apr 12, 2006
114
0
18,690
Comp, thank you for your quick response and the pointer to the sticky. My ambient temp is about 24C. The sticky you referred to stated:

11: Results

Tcase = 30c Idle, 50c Load (SpeedFan: CPU or Temp X)
Tjunction = 45c Idle, 65c Load (SpeedFan: Core 0 / Core 1) hottest Core

so I guess my temps are ok then. It didn't however indicate (hope I didn't miss something there) what the max Core 0/1 temps are - for when I OC... Any ideas?


Mariar, isn't the temp a little higher than it should be (for stock - idle I assume?) - My stock cooler (before I upgraded to the Ultra 120 Extreme) was giving 34C (Core 0/1 were about 46-48)... But I guess each CPU must be different and these temp variations might be normal. (I don't think I know enough to comment on this *Smile*)