Raid 1 failure to copy Tags: NAS / RAID Adaptec Storage Last response: February 26, 2008 8:22 PM in Storage Share techguy911 February 25, 2008 12:14:02 PM I am setting up a system with a mirrored drive there is information on primary and secondary is blank on a system with an adaptec 1200a ata raid card. When i create the raid 1 and copy it always fails, checked both drives no errors? even tried creating raid 1 before hand and copy data to raid array fails?. any ideas?. More about : raid failure copy techguy911 February 26, 2008 8:22:08 PM Ok once i updated the raid bios on card the copy problems vanished its working now. Can't find your answer ? Ask ! Publish Related resources Raid 1 failure but only old data left on remaining drive Forum How to recover from RAID 0 Failure Forum Raid 1 failure causes Forum Rebuild RAID 1 Disk after Failure Forum ICH10R - RAID 5 Failure Forum OS Copy to RAID 0 on 2 New HDD Forum Recovery from RAID member failure Forum RAID 0 Failure Forum Besides a drive failure what can kill a Raid 0 array Forum RAID Failure , Need Advice for next steps Forum How to get notified of HDD failure in Raid 1 ? Forum Drive failure ( Raid 0) Forum CMOS battery dead, boot failure . Is my raid 0 gone? Forum Part of a drive as Raid 1 , is this possible? Forum First SSD advice? Forum RAID 0 in Vista Forum RAID 0 - is it worth it? Forum Vista Ultimate backup vs raid 1 and which controller Forum RAID 5 write speed help Forum Raid problem with LSI raid card Forum More resources Read discussions in other Storage categories Hard Drives DVD Drives DVD Writers Optical Media Flash Media NAS/RAID SSD Western Digital !