2 Drives, 2 Op SYstems, which one does load?

[omaha]

Hi, i have an old 250 gig, and just got a new 500 seagate. I have partitioned the seagate, and have taken a direct image (using driveclone) to part of the 500gig seagate.

I want windows to load off the 250 gig, and just use the rest of the seagate for data.

But, windows seems to load off the new drive, which i do not want.

Do i have to set master/slave? If so, how.

I have an A8n Sli deluxe mobo

All help for this retardo appreciated!

 

[JMecc]

If they are both IDE you do - look on the drive for which pins to put the jumper onto (beside its power plug & parallel cable). Otherwise just pick the right order as the boot order in the bios' boot menu.

Jo

 

[omaha]

Its a seagate 500gig SATA

(forgot to mention that before oops)

 

[JMecc]

Choose the 250GB as the 1st hard drive in the hard drives priority in the BIOS boot menu (as shown in the bottom picture of page 2-33 in the manual (http://dlsvr01.asus.com/pub/ASUS/mb/socket939/A8N-SLI/e2068_a8n-sli.pdf)).

Jo