I need some help with RAID 1 and Vista.

[totakeke]

I'm planning on using RAID 1 with my new setup and I need a little help. I'm using an EVGA 780i SLI motherboard and the BIOS options only list RAID 0, RAID 0+1, and All Enabled. I need just RAID 1, though. Do I set my RAID settings after I save the BIOS settings and restart or do I do it in BIOS? Thanks. (By the way, I'm planning on installing Windows Vista Ultimate.)

 

[dragonsprayer]

if you have 0 +1 then you have just 1,

enable the drives in too raid in the mobo bios, then create the raid with the raid utlity

raid1 will be an option



newegg lists just 1:
Model
Brand EVGA
Model 132-CK-NF78-A1
Supported CPU
CPU Socket Type LGA 775
CPU Type Quad-core / Core 2 Extreme / Core 2 Duo / Pentium
FSB 1333/1066MHz
Chipsets
North Bridge NVIDIA nForce 780i SLI
Memory
Number of Memory Slots 4×240pin
Memory Standard DDR2 800
Maximum Memory Supported 8GB
Dual Channel Supported Yes
Expansion Slots
PCI Express 2.0 x16 2
PCI Express x16 1
PCI Express x1 1
PCI Slots 2
Storage Devices
PATA 1 x ATA100 2 Dev. Max
SATA 3Gb/s 6
SATA RAID 0/1/0+1/5/JBOD