Calibrate Idle Temp & offset

[java_ed]

I tried to calibrate temperatures for the tools following the sticky temperature guide.

I ran into couple problems.

i) I tried to lower the FSB to 200 in bios but it won't boot at that setting with 8x multipler and FSB:MEM - 1:1
in Linked mode. CPU thermal control enabled, speedstep disabled, C1E disabled. CPU core 1.25V

ii) I tried to find the EAX field for the TJunction but it is all zeros with the latest CPUID.

Thanks in advance.

---------
Thermaltake Armor VA8003BWS;Thermaltake Toughpower 650W;Intel E6750 @ 2.66Ghz;Evga 680i SE;Arctic Freezer 7 Pro;4G x Corsair XMS2 DDR2 6400-C4DHX;2x MSI NX8600GT (non-SLI);2x Seagate 7200.11 500G Sata II HDD;Samsung 20x sata DVD burner;Windows vista 32(move to 64 soon)

 

[totenkopf]

uhhh... lower your multiplier? if i remember right the guide says to run 1.6ghz to get as close to ambient as possible, it doesn't say you can't use a lower multiplier.

as for the second problem... I have version 4.14.2.404 for my q6600 and 64bit OS and it works fine... not sure what the problem is there.

 

[java_ed]

ah, I thought the multiplier is fixed on most chips except the extremes. I didn't think of it able to change(being the first time, I try not to change anything I don't suppose to