I'll start off with:
System Specs:
Gigabyte GZ-X1 Chassis
Omega 600W PSU (motherboard, GFX)
230W 2nd PSU from a Dell Optiplex GX1 (fans, HDD, cooling, everything else)
Gigabyte GA-P35-DS3L r1.0 BIOS F6
Cooler Master Aquagate + Zalman WB4+
Golf III Heater Core (not installed yet)
Intel Pentium 4 631 cedar mill 3GHz
2x 1GB DDR2-800 Kingmax
Sapphire ATi Radeon HD2600XT 800MHz/700MHz
WD 80GB SATA (nothing fancy)
2x Seagate 320GB SATA
Samsung DVD-RW SATA
Current CPU Speed: 5.01GHz (15x 334MHz) @ ~1.48750V
RAM: 804MHz @ ~1.9V
GFX Core: 850MHz Memory: 850MHz (voltages unknown as yet)
PCI-E: 100MHz
This is all just the first stage. Second stage includes voltmodding and BIOS-hacking the graphics card, remodeling the chassis with a Dremel and some steel plate to fit the 2nd rad, and possibly adding a waterblock onto the GFX card.
System Specs:
Gigabyte GZ-X1 Chassis
Omega 600W PSU (motherboard, GFX)
230W 2nd PSU from a Dell Optiplex GX1 (fans, HDD, cooling, everything else)
Gigabyte GA-P35-DS3L r1.0 BIOS F6
Cooler Master Aquagate + Zalman WB4+
Golf III Heater Core (not installed yet)
Intel Pentium 4 631 cedar mill 3GHz
2x 1GB DDR2-800 Kingmax
Sapphire ATi Radeon HD2600XT 800MHz/700MHz
WD 80GB SATA (nothing fancy)
2x Seagate 320GB SATA
Samsung DVD-RW SATA
Current CPU Speed: 5.01GHz (15x 334MHz) @ ~1.48750V
RAM: 804MHz @ ~1.9V
GFX Core: 850MHz Memory: 850MHz (voltages unknown as yet)
PCI-E: 100MHz
This is all just the first stage. Second stage includes voltmodding and BIOS-hacking the graphics card, remodeling the chassis with a Dremel and some steel plate to fit the 2nd rad, and possibly adding a waterblock onto the GFX card.