Tom's Hardware: Topic overclocking p5k with AI Suite
Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions.
Sign up now! Its free!
My Specs
Q6600
Arctic Cooler Freezer Pro 7
2GIG DDR2 800 Crucial Ballistix memory
P5K Motherboard
I went into AI Suite and ran AI Booster. I did manual, and set the front side bus to 300mhz, set PCI-Express to 100mhz, set RAM to 833mhz and left RAM voltage on auto. I restarted the machine and my clock speed was now 2.7ghz. Ram was 933mhz. The computer booted up fine.
As i am a bit of a novice at overclocking i then set everything back to normal settings. I am just wondering if the above settings i chose are ok? I know people say you should do it in the BIOS but i am not very comfortable with changing a range of settings in the BIOS. This looked an easier way 
Any advice?
Please mind
You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.
Sponsored links
Ad
Related Topics
- How much RAM can I have with an OCed Q6600
- IS IT WISE TO USE 2GB RAM OR SHOULD I STICK WITH 1GB.
- Overclocking with Intel DG33FB
- E6600@3,29, new to overclocking, any tips!?
- First time overclocking
- AMD x2 versus e2180 and overclocking
- Overclocking my 4800+ brisbane
- Overclocking an E6420 on a GA 945P DS3 mobo - help needed
- Overclocking and heat temperature
They won a badge
Join us in greeting them
- 01:00 ventond won the Freshman badge
- 01:00 4thorion won the Freshman badge
- 01:00 specialk90 won the Freshman badge
- 01:00 notsosoftware won the Uniformed badge
- 01:00 LMHmedchem won the Uniformed badge
- 01:00 n4gix won the Uniformed badge
- 01:00 vivalibre won the Uniformed badge
- 01:00 casperinmd won the Freshman badge
- 01:00 dinesh_80 won the Freshman badge
- 01:00 kennon won the Freshman badge