Sign in with
Sign up | Sign in
Your question

Ati 9700 Pro AIW and MSI kt400 ultra problem

Tags:
  • Radeon
  • MSI
  • Graphics
Last response: in Graphics & Displays
Share
November 2, 2007 6:15:09 PM

Computer Spec


Msi KT400 Ultra
1 Gig of Ram
1.7 Amd thoroughbred
9700 Pro AIW


Problem i have it, i just removed a 9800 SE card from my PC and at the time my cpu was clocked at its Norm wich is 1.7mhz

well i came across the 9700 pro aiw so i threw it in there, when i first put it in, it would not post, so i defaulted all the bios settingd, by reseting the cmos and now boots fine, but when i go in and change the FSB to the norm 133 it wont boot again, any suggestions on why this is happening, (side note) when the 9800 pro first came out i had one of them in this system ran fine not sure if this helps but i cannot put the FSB back to 133 or it will no post, back to 100 and it boots fine, help me, thx in advance

More about : ati 9700 pro aiw msi kt400 ultra problem

November 4, 2007 3:33:48 PM

nobody has any clue why this is doing that?
November 5, 2007 1:08:43 AM

nm i had the PSU cord shared with the HD and i hooked up the hd to a diff power cord and graphic card had its own, and now all works fine
!