Gigabyte Motherboard problem

[cmangle]

I've got a new Gigabyte GA-965P-S3 Intel P965 socket 775 motherboard that won't boot up. All components below are new.

What's installed: Intel Celeron D 352 3.2 GHz Processor
ATI All-In-Wonder X600 Pro PCI Express
SEAGATE 160GB SATA HD
Corsair XMS2 2GB (2x1GB) DDR2-800

At power up, the CPU fan spins, the ATI cpu fan spins and two cooling fans spin.

This continues for about 30 secs and then shut down.

Nothing appears on at all on the Viewsonic 17" LCD monitor.

No graphics, no bios, no video card ident display, nothing at all.

Any suggestions as to where the problem lies?

 

[cfvh600]

What power supply are you using? All the power connectors plugged into the motherboard?

 

[cmangle]

580w Sunbeam power sply/

 

[Andrius]

Does your case have a speaker (beeper) ?

You should reseat your RAM, graphics card and processor.
If that doesn't help (still no POST/ error beeps) one of this components is most likely dead or the motherboard doesn't detect the RAM or CPU.

EDIT : What revision is your motherboard ? Maybe it needs a bios update.
Also some 965 boards had issues with certain RAM types if I remember correctly.

 

[o1die]

Be sure to connect the case speaker lead to the board to get some beep codes.

 

[tahirawan11]

hi all

My hardware is :

new Gigabyte GA-965P-S3 Intel P965 socket 775 motherboard

Intel Core 2 Duo 2.00 Ghz

Two Kingston 1 Gb ddr2 each at 800 mhz

MSI Geforce 8600 GTS 256 mb

I am having exactly the same problem that was posted as mentioned below, no beep, no graphics, My hardware are perfectly working on other motherboards.
Plz HELP ASAP !!!

I've got a new Gigabyte GA-965P-S3 Intel P965 socket 775 motherboard that won't boot up. All components below are new.

What's installed: Intel Celeron D 352 3.2 GHz Processor
ATI All-In-Wonder X600 Pro PCI Express
SEAGATE 160GB SATA HD
Corsair XMS2 2GB (2x1GB) DDR2-800

At power up, the CPU fan spins, the ATI cpu fan spins and two cooling fans spin.

This continues for about 30 secs and then shut down.

Nothing appears on at all on the Viewsonic 17" LCD monitor.

No graphics, no bios, no video card ident display, nothing at all.

Any suggestions as to where the problem lies?

 

[SpinachEater]

See if you can boot it up outside of the case on the foam pad. If so you are grounding on your case.

 

[Werner_44]

Hey iv'e got the same prob! but went and read it up! its the motherboard that is faulty! Factory fault! i want to take mine back coz i got a 3 year warranty! and im put off by this act! i want a new one! and very fast!!!