Upgrading SCSI controller to RAID 1

Tom's Hardware Forums » Storage » NAS/RAID & Technologies » Upgrading SCSI controller to RAID 1

Upgrading SCSI controller to RAID 1

Show comments: By default All Good ratings Poor ratings

Word : Username : Filter :
Bottom
Author	Thread : Upgrading SCSI controller to RAID 1

completecs

Profile: stranger

More Information

07-15-2008 at 09:46:16 PM

I have a PowerEdge 1600sc running Windows 2003 with a single SCSI drive utilizing the on-board scsi controller. I want to install an Adaptec 29320 controller and configure RAID1. My question is can I move the disk from the original on-board SCSI controller and place it on the new RAID controller, add another SCSI drive, create a RAID 1 mirrored array and not lose any data?

Thanks,
Jim

Related Pr oduct

rozar

Profile: enthusiast

More Information

07-15-2008 at 11:43:26 PM

Hide

See SomeJoes sticky

http://www.tomshardware.com/forum/ [...] ng-windows

Just remember to backup first.

---------------
Intel DX48BT2 bone trail 2 || Xeon X3350 with Xigmatek S1283 || 4GB Gskill DDR3 1600 || 1 - 300GB 15k SAS boot , 3 - 750GB SATA Raid 5 || Adaptec 5805 SAS RAID controller || ATI 3870 || Antec 300 Chassis with Nspire 600 watt PS

Go to:

Tom's Hardware Forums » Storage » NAS/RAID & Technologies » Upgrading SCSI controller to RAID 1

Page generated in 1.432 seconds

Google Ads