Sign in with
Sign up | Sign in
Your question

+12v of 0.0v - Reading from speedfan need help plz!!

Tags:
  • Power Supplies
  • Speedfan
  • Components
Last response: in Components
Share
November 28, 2007 5:49:19 AM



After opening speedfan I noticed this strange reading: my +12v is 0!
Need help plz. Recently I experienced crash in Far Cry and unstable performance in Oblivion. Far Cry crashed even at vCore 1.25v on stock speed. I used to OC to 2.8GHz but now I can't, not even 2.1GHz. I think my PSU has a problem.

I have E6300 B2 @ stock
OCZ Gold XTC PC2 6400
OCZ ModStream 450W 26A
Gigabyte GA-965P-DS3 rev 1.0
ATI Radeon X800 XL 256MB stock
Coolermaster Centurion 5
Thermaltake Big Typhoon
Arctic Silver 5
Seagate 250GB SATA 7200.10

More about : 12v reading speedfan plz

November 28, 2007 6:55:08 AM

LMAO! SpeedFan says 0V and you believe it? Your system wouldn't be running at all if the power supply had any serious issues.
November 29, 2007 12:34:45 AM

What software can read PSU voltage?
November 29, 2007 1:11:58 AM

The PSU is connected to the motherboard, there are several sensors that detect the input voltage near the ATX connector. Unfortunately, most software that is supposed to take readings from those sensors uses the wrong reference values, or is automatically configured for the wrong controller chip.
!