Hi All,
I have just o/c'd my E8400 to 3.6Ghz stable but I am nervous about long term effects ect...?
My VCORE is 1.25
Core Temps 49' Idle and 59' Under Orthos Load
My memory is OCZ REAPER P6400 and I set Looser than spec at 5-5-5-15
The main concern is I set it to 9X400 = 3.6 i CAN NOT RAISE IT HIGHER THAN 9 x THATS THE MAX
But FSB goes to 1600 and its only rated @ 1333.
Board is a GA-P35-DS3P
PLEASE advise.??
I have just o/c'd my E8400 to 3.6Ghz stable but I am nervous about long term effects ect...?
My VCORE is 1.25
Core Temps 49' Idle and 59' Under Orthos Load
My memory is OCZ REAPER P6400 and I set Looser than spec at 5-5-5-15
The main concern is I set it to 9X400 = 3.6 i CAN NOT RAISE IT HIGHER THAN 9 x THATS THE MAX
But FSB goes to 1600 and its only rated @ 1333.
Board is a GA-P35-DS3P
PLEASE advise.??