Tom's Hardware > Forum > General Networking > Network General Discussions > Question on rj45 connectors.

Question on rj45 connectors.

Forum General Networking : Network General Discussions - Question on rj45 connectors.

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Ask the community Add a reply
Word :    Username :           
 
ingeborgdot   08-06-2008 at 04:43:55 AM

I am running some cat5e cable to another room to run another computer and to run into my stereo also.
I will run two cables to a wall connector from my router. I have set the wall connector up with the T568A arrangement. Is that ok?
My question is how should I set up the cords running from the router? What arrangement and how should I set up the male end of the main cords running to the other room? Does this make sense? Thanks.

Add a reply
Sponsored Links
Register or log in to remove.
mdeezy   08-06-2008 at 05:40:00 PM
- 0 +

you post is a bit confusing but to clarify basically you want to run two cat5e cables from the router to another room correct?

As long as the cat5e cable is terminate the same at both ends you wont have a problem so if you use the T568A, only use that scheme. To the wall connector use the T568A configuration when you punch it down.

Besides that you shouldn't have a problem and all should work okay.

Reply to mdeezy
ingeborgdot   08-06-2008 at 07:38:25 PM
- 0 +

That's what I thought but just wanted to check. thanks.

Reply to ingeborgdot
authoratah   08-13-2008 at 07:20:47 AM
- 0 +

Sounds like you know what you're doing :) Tell me about the stereo though, I'm intrigued. I know printers and faxes sometimes have ethernet ports, but stereos is a new one on me.

Reply to authoratah
Nils   08-18-2008 at 10:58:21 PM
- 0 +

Some digital amplifiers can play digital audio files shared on an LAN through an ethernet port. DENON has some.


Message edited by Nils on 08-18-2008 at 10:58:54 PM
Reply to Nils
Ask the community Add a reply
Tom's Hardware > Forum > General Networking > Network General Discussions > Question on rj45 connectors.
Go to:

There are 1235 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.608 seconds
Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
Related Topics
See all relatives topics
They won a badge
Join us in greeting them
  • 01:00 bew1075k won the Uniformed badge
  • 01:00 Parasitic won the Uniformed badge
  • 01:00 X3no won the Uniformed badge
  • 01:00 Siq won the Uniformed badge
  • 01:00 wayspooled won the Uniformed badge
  • 01:00 chris62 won the Freshman badge
  • 01:00 Tattysnuc won the Freshman badge
  • 01:00 gamerk316 won the Freshman badge
  • 05:23 jsc won the Overclocking badge
  • 01:00 rolli59 won the Spy badge