I posted earlier in the homebuild section where i am getting a BSOD stop error when installing XP with a Raid 1 array
The stop error is: 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000)
When i googled it it was a stop error with the raid 1 devices. Some said u need to install the drivers off a floppy (which i dont have i mean who uses floppies anymore?!?!) Others said that with an Asus board (I have the P5Q Deluxe) they have a problem with how it recognizes IDE drives but nothing is IDE and theres only 1 IDE slot.
So im totally lost as to how to fix my error.... Can anyone give a little help?!
Much Appreciated. Silver
Edit: Took a closer look at the manual and it says install Windows before setting up raid....but doesnt the raid just erase it?
Message edited by Silverion77 on 09-06-2008 at 04:57:50 PM
------------------------------Antec 1200|Antec Signature 850w|Asus Maximus II Formula|Q9650|4GB Dominator 1066|EVGA 9800GX2
Try installing windows on a single drive , to rule out a RAID issue first. If it works in will need to setup the RAID-1 again in the controller BIOS and install the driver on XP CD boot "PRESS F6 to install additional drivers"
------------------------------"This thread made me strap on my lolerskates and head for my roflcopter."
Reply to chookman
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.