I was wondering if i could use this hard disk drive
http://www.compusa.com/application [...] &CatId=139 In my Dell dimension e510 desktop pc
It has the standard motherboard, im only concerend because this is a sata-300 drive and ive been told that this board only supports sata-150, but you can use this drive if you jumper it, but ive also been told if you jump to 150 from 300 it voids the warranty? <- dumbest thing ive ever heard but i would like some imput please.
Jumper wires are not the same as jumpers. Jumper wires usually are soldered on the board and that would void your warranty. Adding a jumper as per OPT1
http://wdc.custhelp.com/cgi-bin/wd [...] ed=#jumper to limit the transfer rate to 150MB/s will not void the warranty.
I have a few 300MB/s drives connected to SATA 150 PCs and they work fine.
my psu has a sata connector but 18inches isnt enough too keep it out of the ways of my fans, and i have have lots of trouble finding a 24inch cable, do you know a good place to get these?
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.