Tom's Hardware > Forum > Overclocking > CPUs > difference between cores Q6600

difference between cores Q6600

Forum Overclocking : CPUs - difference between cores Q6600

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Ask the community Add a reply
Word :    Username :           
 
mosdapwn   04-22-2008 at 11:44:31 PM

huge difference between the temps of the cores ... was a 8-9 degrees when i bought it, now i see 8 on core 4 and 21 on core 1 ...

------------------------------ Gigabyte P35-DQ6 | Custom Cooling / Gigabyte Block
XFX 8800 GTX @ 650/1550/2020 (RMA'D , people at warranty are givin me a hard time)
Q6600 G0 @ 4 Ghz @ 1.5v
2x 1GB HyperX 1066 @ 890Mhz @ 4-4-4-12.
Add a reply
Sponsored Links
Register or log in to remove.
outlw6669   04-22-2008 at 11:50:54 PM
- 0 +

Is that delta or actual reading?
What are software are you using to read the temps?
If you are not using Coretemp, you should see what that reads.

Post your temps idle and load before we can help more.

------------------------------ If the automobile had followed the same development cycle as the computer, a Rolls-Royce today would cost $100, get a million miles to the gallon, and explode once a year, killing everyone inside.
PSA
 Reply to outlw6669
Evilonigiri   04-23-2008 at 01:45:02 AM
- 0 +

Possibly faulty sensors, as well as uneven contact area with IHS and cooler. Probably poor tuning of the sensors.

------------------------------ "Nvidia, the Way It's Meant to be PAID Played! - Corrado
*Lesbian Lover Club* - founder Assman
 Reply to Evilonigiri
mosdapwn   04-23-2008 at 01:45:52 AM
- 0 +

thats actual reading ...
here are my temps now using coretemp
9 12 3 3
all cores are almost idle.
I must say it got a little better , but a 9-12 C difference scares me a little
Most of my friends have 3-4C between the highest and the lowest core , 5 at the most.


Message edited by mosdapwn on 04-23-2008 at 01:48:41 AM
------------------------------ Gigabyte P35-DQ6 | Custom Cooling / Gigabyte Block
XFX 8800 GTX @ 650/1550/2020 (RMA'D , people at warranty are givin me a hard time)
Q6600 G0 @ 4 Ghz @ 1.5v
2x 1GB HyperX 1066 @ 890Mhz @ 4-4-4-12.
 Reply to mosdapwn
mosdapwn   04-23-2008 at 02:01:12 AM
- 0 +

faulty sensors , i can live with that , is there anyway to know which one of the temps is closest to the actual , .. the bottom ones are close to match the cpu

Message quoted 1 times
------------------------------ Gigabyte P35-DQ6 | Custom Cooling / Gigabyte Block
XFX 8800 GTX @ 650/1550/2020 (RMA'D , people at warranty are givin me a hard time)
Q6600 G0 @ 4 Ghz @ 1.5v
2x 1GB HyperX 1066 @ 890Mhz @ 4-4-4-12.
 Reply to mosdapwn
Evilonigiri   04-23-2008 at 02:04:42 AM
- 0 +

mosdapwn wrote :

faulty sensors , i can live with that , is there anyway to know which one of the temps is closest to the actual , .. the bottom ones are close to match the cpu


The best way is to exchange the cpu for a new one. Faulty sensors, or rather inaccurate sensors aren't uncommon. I guess you'll have to ask Computronix on this for more info, he's the temp master around here. :sol:

------------------------------ "Nvidia, the Way It's Meant to be PAID Played! - Corrado
*Lesbian Lover Club* - founder Assman
 Reply to Evilonigiri
mosdapwn   04-23-2008 at 02:12:45 AM
- 0 +

alright , newyas i tested with realtemp , on stock it gave me 0 movement on the 2 cores that were 3C .. so i oced to 4.0 and added a crap load of voltage , strangely , the two cores seemed to remain at 3C , but i got a rather huge 22 20 17 17 (delta)... guess its the 5C difference in the delta as well .. thanks anyways ..


Message edited by mosdapwn on 04-23-2008 at 02:14:19 AM
------------------------------ Gigabyte P35-DQ6 | Custom Cooling / Gigabyte Block
XFX 8800 GTX @ 650/1550/2020 (RMA'D , people at warranty are givin me a hard time)
Q6600 G0 @ 4 Ghz @ 1.5v
2x 1GB HyperX 1066 @ 890Mhz @ 4-4-4-12.
 Reply to mosdapwn
Ask the community Add a reply
Tom's Hardware > Forum > Overclocking > CPUs > difference between cores Q6600
Go to:

There are 1359 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.918 seconds
Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
Related Topics
See all relatives topics
They won a badge
Join us in greeting them
How do I win badges?