I ask becuase I am not getting any POST beeps on my new build
In the manual I am not able to locate any mention of a speaker other than the Front Panel Connectors (Pwer, HDD,etc). And the Antec 900 I am using does not have a speaker to connect to these pins.
Will continue to do some POST troubleshooting, but any help on this topic is appreciated.
This is not good news. I am not able to locate a speaker connector coming from the case, and the manual refers to only the RST, PWR (2), and HDD LED connectors.
This is the same for both Antec cases I am looking at (900, P185).
Looks like need to either fashion a small speaker, or troubleshoot this build w/o the help of beep codes.
So, I just bought a P182 and a GA-P35-DS3L... no post beeps for me? That is worrisome. I hope I do not have any troubles! Anyone know if you can buy a speaker with the right connectors?
Normally on front of case.... but some with motherboards come with little plugin ones now... they all the same i think 4 pin (only 2 used 0&3)...... Your manual: 10) F_PANEL (Front Panel Header)
Ummm... something is wrong here. I have the same board. On the p35-ds3l, the last four pins on the RIGHT ON THE TOP ROW on the bottom at the right hand corner of the board and the post speaker pins. Your case should have come with either a connector to hook there, or a mini-speaker that hooks directly to the board. Are you sure those pins are missing? I have Rev 2 of the board, maybe you have Rev 1? If so, send it back and get the 2nd one.
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.