Antec 900 Rev B?

[mtyermom]

I just ordered an Antec 900 from zipzoomfly:

http://www.zipzoomfly.com/jsp/ProductDetail.jsp?ProductCode=140146

How do I know if it's the B revision?

 

[Conumdrum]

I think the B has been out for a pretty long time, so you should be safe. If they don't show pics and state it's a B it could be an A ver.

You would have to contact the seller and have them look at the box.

I think the B has the watercooling hose holes on the back.

 

[trevorblain]

it looks just like mine, which according to the box is v1.1. No letter designation to be found. Hope that helps.

 

[trevorblain]

Ah, saw conundrums post after I finished mine, and I missed that detail. Mine has the water cooling holes (again, the box says v1.1, not rev B). I'm not seeing the holes on the link you posted.

 

[lv426]

I've noticed 3 differences than the first revision

1 - as pointed out in previous post, the two round holes in the back instead of the vent

2 - the metal between the I/O plate and the expansion cards has been altered

3 - extra cut-out inside


Pic

http://img264.imageshack.us/img264/202/dscf0164pz8.jpg

 

[chookman]

I've noticed 3 differences than the first revision

1 - as pointed out in previous post, the two round holes in the back instead of the vent

2 - the metal between the I/O plate and the expansion cards has been altered

3 - extra cut-out inside


Pic

http://img264.imageshack.us/img264/202/dscf0164pz8.jpg

2. Was to resolve an issue with using the top slot with some GPU's with DVI-2-VGA adapters wouldnt fit in (would hit the metal)

 

[mtyermom]

2. Was to resolve an issue with using the top slot with some GPU's with DVI-2-VGA adapters wouldnt fit in (would hit the metal)

So it was only a problem with DVI to VGA adapters? I'm using DVI only so hopefully I'll be safe either way...

 

[chookman]

So it was only a problem with DVI to VGA adapters? I'm using DVI only so hopefully I'll be safe either way...

i believe so dont hold me 2 it