Tom's Hardware > Forum > Motherboards & Memory > Gigabyte > loading raid driver AFTER OS load
Word :    Username :           
 

Ive put my OS on a single raptor drive (I do not want to RAID my OS). Now, I want to either Matrix Raid or RAID0 two additional scratch/storage 500gb drives. I'm unclear to how I need to load the RAID drivers and proceed. Most of the info I search on addresses doing the F6 to allow loading of the OS on an array. Since I'm NOT loading the OS on a RAID, it seems like I could load the RAID drivers (which one's and how I'm not sure) and then update my BIOS, etc.

Can anyone get me started? ga-p35-ds3p

Sponsored Links
Register or log in to remove.

you should able to load the driver from the inside of windows.


Message edited by Joe_The_Dragon on 01-09-2008 at 03:45:25 AM
------------------------------ http://www.moola.com/moopubs/b2b/e [...] 4e6a593d-2

http://www.sendearnings.com/?r=JoeDragon
Reply to Joe_The_Dragon

And exactly what driver is that? I'm using the Intel controller for my drives (versus the Gigabyte SATA driver). thanks

Reply to kerrvaughn

Actualy I think after you enabled and created the raid in the bios windows should see it as new hardware and if you installed the gigabite drivers it is all on your system already so it should find it

the intel raid drivers if not sure download from your boards sites should have it


Message edited by Bohoba on 01-09-2008 at 10:04:59 AM
Reply to Bohoba
Tom's Hardware > Forum > Motherboards & Memory > Gigabyte > loading raid driver AFTER OS load
Go to:

There are 525 identified and unidentified users. To see the list of identified users, Click here.

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
They won a badge
Join us in greeting them