Hey All,
As I said, I have a 8800GT I brought in from Singapore.
it's xfx, AlfA-Dog Edition, 640mhz core speed.
BUT, as far as I can say, standard fan and heat sink.
after about 2.5hrs in Crysis, the screen got to be all red, and the computer stuck.
I believe it's over heating of the card, as it was very hot to touch, with nominal temp in windows of 54C.
Should I over-run the fans using Riva Tuner?
should I replace heat sink or fan?
Hey All,
As I said, I have a 8800GT I brought in from Singapore.
it's xfx, AlfA-Dog Edition, 640mhz core speed.
BUT, as far as I can say, standard fan and heat sink.
after about 2.5hrs in Crysis, the screen got to be all red, and the computer stuck.
I believe it's over heating of the card, as it was very hot to touch, with nominal temp in windows of 54C.
Should I over-run the fans using Riva Tuner?
should I replace heat sink or fan?
can it be just game problem?
thanks all....
I would install the 169.12 Display Driver from Nvidia for your card, back when it was in (BETA), I had artifact tearing and other issues and it would crash but this driver was designed for the Crysis engine and the 8800 GT in mind as well. Hope that helps.
------------------------------General - "Mr.McKittrick, after very careful consideration sir, I have come to the conclusion that you, new defense system sucks." McKittrick - "I don't have to take that you pig-eye sack of ****!" - Wargames (1983)
Reply to nxcmp
Oh and yes use RivaTuner 2.06, a good fan speed for that stock clock would be about 50+ % for sure to keep it well within limits. I use direct control (constant speed) of 75% when I overclock my eVGA 8800 GT SC to SSC spec. Good Luck.
Message edited by nxcmp on 12-19-2007 at 11:49:49 PM
------------------------------General - "Mr.McKittrick, after very careful consideration sir, I have come to the conclusion that you, new defense system sucks." McKittrick - "I don't have to take that you pig-eye sack of ****!" - Wargames (1983)
Reply to nxcmp
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.