PRINTER EPSON R300

I HELD DOWN POWER MAINT & STOP FOR 10 SECONDS NOW THW PRINTER WILL NOT WORK ANY SUGGESTIONS WILL BE WELCOME THANK YOU
8 answers Last reply
More about printer epson r300
  1. ARFERFISHY said:
    I HELD DOWN POWER MAINT & STOP FOR 10 SECONDS NOW THW PRINTER WILL NOT WORK ANY SUGGESTIONS WILL BE WELCOME THANK YOU


    unplug the printer from the wall power for 30 seconds, plug it back in. push power on, does it work now?
    Why did you hold down power and stop for 10 seconds anyway?
  2. NO THAT DID NOT WORK
    WHEN I TRY TO PRINT I GET THE MESSAGE A CONNECTION IS NOT CONNECTED BUT THEY ARE I HELD THE THREE BUTTONS DOWN TO CLEAN WASTE INK AS SOMBODY ELSE IN THE FORUM SUGGESTED
  3. click my computer
    click control panel
    click printers and faxes
    is your printer on the list?
    is there a big check mark next to the printer you are trying to use?
    If you do not do that, then there is not much anybody can do to help you get your printer working. You have to follow through.
  4. THANK YOU FOR YOUR HELP I HAVE TRIED YOUR SUGGESTION ALREADY I HAVE EVEN RE INSTALLED THE PRINTER TO NO AVAIL
    THANK YOU ANYWAY REGARDS PETER
  5. The problem being that you have never answered the questions, If you would answer we could probably help you.
    Read the questions and answer them then you could probably get the answers you need.
    click my computer
    click control panel
    click faxes and printers
    Does your printer appear on the list? Yes or No?
    Is there a check mark next to the printer you are trying to use? Yes or No?
    As long as you assume the printer is installed, and the printer does not work, then we can gather that the printer is not installed, even though you think it is. And using your current method the printer will never be installed, and never work.
  6. YES IT DOES
    YES THERE IS
    SO WHAT IS NEXT?
  7. turn the printer off
    unplug the printer USB cable from the printer
    load letter sized paper into the printer
    turn on the printer
    press the maintenance button, just once
    use the up down arrow buttons to highlight nozzle check, press OK
    Press OK to print
    If the page prints, the printer checks out
    If the page does not print, the printer is defective, return the printer to the vendor for a new unit.
    Then let us know if the printer tested OK, or if it was a defect.
    we can go from there if the printer checked OK.
  8. yes this worked on the controls that are on the printer
    when i tried same using the computer nothing
Ask a new question

Read More

Configuration Epson Power Printers Windows XP