Tom's Hardware > Forum > Overclocking > General Discussions > [OC] Q6600 P5N-SLI

[OC] Q6600 P5N-SLI

Forum Overclocking : General Discussions - [OC] Q6600 P5N-SLI

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Ask the community Add a reply
Word :    Username :           
 
megabitez   06-19-2008 at 06:12:40 AM

Ok For 4 days straight i been searching forums for 4-5hours a day...I cant get it to boot with ANY setting i find....Can someone please help me....
My current setup is
asus p5n-sli
ultra chilltec cpu cooler
OCZ ddr2 4096mb pc6400 800mhz
nvidia geforce 8800gts
ultra x-pro 750watt power supply

i had gotten it to post 1 time at 3.1
i cant figure out what i did =(( please help

My goal is 3.1 again please

Add a reply
Sponsored Links
Register or log in to remove.
iluvgillgill   06-19-2008 at 06:39:51 AM
- 0 +

did you up the voltage?and make sure you got the latest BIOS.

Reply to iluvgillgill
megabitez   06-19-2008 at 06:43:41 AM
- 0 +

i have the lasted bios for sure i went according to voltsage i seen on the forums with other peoples settings. i did not go beyond there volts

Reply to megabitez
shata   06-19-2008 at 11:06:57 AM
- 0 +

Well overclocking is a gradual process not a Set the voltage to 2v and fsb to 400...

Gotta go slow up the FSB a little till the system wont do Prime95 anymore then when it errors give it a little voltage and make sure the memory is ratio'd if you have **** speed memory your going to have to do that.

You might have to do some research on how to overclock on the web cause i have feeling you have no idea, and it takes some experience to do it right and to know whats making the system unstable.

Message quoted 1 times
------------------------------ http://xs136.xs.to/xs136/09072/nvidia769.jpg
 Reply to shata
Eric Tardes   06-19-2008 at 11:28:32 AM
- 0 +

P5N-SLi(and all other 650i,and think 680i) have problems overclocking quads, due to dispute between Nvidia and Intel,unlike p35/38, so I think if you got it stable @3000, leave it there, because 3100 will not give you much better performance!

Reply to Eric Tardes
iluvgillgill   06-19-2008 at 10:00:50 PM
- 0 +

shata wrote :

Well overclocking is a gradual process not a Set the voltage to 2v and fsb to 400...

Gotta go slow up the FSB a little till the system wont do Prime95 anymore then when it errors give it a little voltage and make sure the memory is ratio'd if you have **** speed memory your going to have to do that.

You might have to do some research on how to overclock on the web cause i have feeling you have no idea, and it takes some experience to do it right and to know whats making the system unstable.



up the CPU voltage to 1.5v and up the FSB to 333 select sync on memory and up the ram volt to 2.1 and set timing to 4-4-4-15. so you say thats not gonna work? if you say no then there will be alot of people shoutting at you.hint hint

Reply to iluvgillgill
pcgamer12   06-19-2008 at 10:17:32 PM
- 0 +

Post your temps and bios settings.

Also list VID. Use Real Temp for temps.

Reply to pcgamer12
Ask the community Add a reply
Tom's Hardware > Forum > Overclocking > General Discussions > [OC] Q6600 P5N-SLI
Go to:

There are 1320 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.201 seconds
Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
Related Topics
See all relatives topics
They won a badge
Join us in greeting them