Sign in with
Sign up | Sign in
Your question

can you help me do oc please

Last response: in Overclocking
Share
June 30, 2008 6:59:05 AM

i want to oc but i don't know what i do setting to bios exactly Voltage and Frequency etc..can it be FSB:D RAM = 1:1 ?
what sould i do?

my system

Q6600 2.4Ghz
Gigabyte GA-X38-DQ6
2x2 OCZ Reaper HPC PC8500 1066Mhz
512 ZOTAC 8800 AMP Edition
500 GB Seagate
OCZ 600W PSU

More about : question

June 30, 2008 7:24:06 AM

set the ram to pc2 6400 800mhz and turn up the fsb
June 30, 2008 8:03:09 AM

Yes put your memory/fsb divider @ one. Then turn up the fsb to 333, it may require a slight cpu voltage increase. What is your cpu default voltage?
Related resources
June 30, 2008 8:10:57 AM

cpu default voltage 1.275..additionally, OCZ Reaper HPC 2x2 kit running 5-5-5-15-1T at 2.2V but i couldn't ?
June 30, 2008 9:02:47 AM

Tisk tisk people.

Ok when Ocing first read some ocing guides and what functions will need to be turned off or on for your chip set then look up what memory strapping your bois have.

Then your ready to start make sure you set ram strapping is set so you will only OC your CPU to start with. Bump the FSB by 10 points run prime 95
If everything goes good repeat. When you get errors then bump voltage
checking temp with speed fan and repeat. After you get a stable OC with acceptable temperatures and voltage start with the ram run mem test so forth and so on. hope this was helpful
June 30, 2008 9:11:36 AM

i think i need try this over and over:)  thanks for helping and hope so i'll accomplish :) 
!