Tom's Hardware > Forum > Overclocking > AMD > 1st Time OC HELP(ATHLON X2 4200+ ECS C51GM-M MOTHERBOARD)

1st Time OC HELP(ATHLON X2 4200+ ECS C51GM-M MOTHERBOARD)

Forum Overclocking : AMD - 1st Time OC HELP(ATHLON X2 4200+ ECS C51GM-M MOTHERBOARD)

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Ask the community Add a reply
Word :    Username :           
 
konchuzthawt   07-06-2008 at 07:10:12 AM

Ok so I have decided to give this whole OC thing a try but I don't seem to know just how to go about it. I have read several sources on over clocking this particular processor but have noticed my System BIOS is a little short on configuration options. Not to mention when I checked my motherboards reference book it has no section on what jumpers I can change for different configurations.

Specs:

ATHLON X2 4200+ (2.2 Ghz NATIVE)
ECS C51GM-M
1 GB KINGSTON DDR2 533(UPGRADING TO PNY OPTIMA 2GB DDR2 667 PC2 5300 NEXT WEEK)
NVIDIA GEFORCE 7600 GS DDR2 512MB PCIe(UPGRADING TO GEFORCE 8600 GTS 512MB GDDR3 PCIe NEXT WEEK)
Only have 2 stock case fans
Any help would be greatly appreciated for current and/or future upgraded system.

Message quoted 1 times
Add a reply
Sponsored Links
Register or log in to remove.
randomizer   07-06-2008 at 07:21:08 AM
- 0 +

konchuzthawt wrote :


NVIDIA GEFORCE 7600 GS DDR2 512MB PCIe(UPGRADING TO GEFORCE 8600 GTS 512MB GDDR3 PCIe NEXT WEEK)


I'd avoid the 8600GTS. Although it is certainly an upgrade, you can probably pick up an 8800GT for not much more (if price differences are similar to Aus) and totally crush the 8600GTS. You'd need to make sure your power supply was adequate though, and also mention your budget.

As for the overclocking, jumpers are pretty old school, you shouldn't need to touch any except the CMOS reset jumper if you screw up.

Message quoted 1 times
Reply to randomizer
th_username   07-06-2008 at 07:24:17 AM
- 0 +

not worth to buy 8600gts

Reply to th_username
konchuzthawt   07-06-2008 at 07:25:18 AM
- 0 +

*ok did some checking and there are no jumper settings that can be changed so it's all about the BIOS. In the BIOS I can change the CPU Frequency, CPU Voltage, Mem Clock Value, DIMM Voltage, CPU Speed Spectrum, & HT Speed Spectrum

Reply to konchuzthawt
konchuzthawt   07-06-2008 at 07:28:41 AM
- 0 +

randomizer wrote :

I'd avoid the 8600GTS. Although it is certainly an upgrade, you can probably pick up an 8800GT for not much more (if price differences are similar to Aus) and totally crush the 8600GTS. You'd need to make sure your power supply was adequate though, and also mention your budget.

As for the overclocking, jumpers are pretty old school, you shouldn't need to touch any except the CMOS reset jumper if you screw up.



I was looking at the 8800GT but noticed it called for a PCIe 2.0 and I am having trouble figuring out if I have a 2.0 or not


*Edit: I just read about the compatibility and it should work fine regardless of the PCIe Version as long as it's x16 which mines is.


Message edited by konchuzthawt on 07-06-2008 at 07:38:54 AM
Reply to konchuzthawt
randomizer   07-06-2008 at 09:05:21 AM
- 0 +

Yea you won't have any problems at all. Now if your board had a VIA chipset you would be gambling to try an 8800GT with it.

Reply to randomizer
konchuzthawt   07-08-2008 at 09:18:53 PM
- 0 +

GRRRRR!!!!!!!!! Just installed the new ram(PNY OPTIMA 2GB DDR2 667 PC2 5300) and I get nothing but constant beeping from my pc. I reset the cmos and left the battery out for a very long time yet still get the beeping sound. I changed the bios settings(with the old ram not new) to what the new ram required(as best I could being I could only change the timing mode: [MaxMemClock], Memory Clock value or limit [667], and DIMM voltage control [+150mV]) and yet still a beeping sound. Works fine with old ram but not with new ram. Tested the ram in another rig and the ram works flawless. =(

Reply to konchuzthawt
pont   08-03-2008 at 01:29:39 AM
- 0 +

maybe that ram runs on more than 1.8 v ..look and see what it calls for. and change it in the bios ?

------------------------------ antec p180
gigabyte GA-MA78G-DS3HP
Phenom II X3 720 BE @ 3.5
g-skill ddr 1066
Reply to pont
pont   08-03-2008 at 01:34:59 AM
- 0 +

i just looked and the info on that ram is not very good(that i can find) but here are the timings

Brand PNY
Series Optima
Model MD2048SD2-667
Type 240-Pin DDR2 SDRAM
Tech Spec
Capacity 2GB
Speed DDR2 667 (PC2 5300)
Cas Latency 5
Timing 5-5-5
Heat Spreader Yes

you may need to chang that im not sure maybe someone eles can give you better advice

------------------------------ antec p180
gigabyte GA-MA78G-DS3HP
Phenom II X3 720 BE @ 3.5
g-skill ddr 1066
Reply to pont
Ask the community Add a reply
Tom's Hardware > Forum > Overclocking > AMD > 1st Time OC HELP(ATHLON X2 4200+ ECS C51GM-M MOTHERBOARD)
Go to:

There are 1010 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.676 seconds
Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
Related Topics
See all relatives topics
They won a badge
Join us in greeting them