anyways, cpu-z shows my timing at 5-5-5-18 with the voltage set at 1.8v
the specifcations call for
Timing 4-4-4-12
Voltage 2.1V
my question is should i change mine to the recommended specs?? and if so will I even see a difference.. also I looked in my bios and i didnt see where to make the changes??
I should add that my pc runs like a top now and never ever crashs.. so all is well.
This is a very common issue with motherboards. Especially if u use a memory not in listed motherboard supported memories. All you have to do is set the timings manually and ur good to go. Very easy and simple. In fact always good to set timings manually because then u know what the settings are at all times.
If your board doesnt support memory ocing, i would just leave it alone then. Not to much of a change unless ur an extreme comp user and if that was true ud have a board with memory oc features.
Message edited by lankiller on 02-17-2008 at 07:26:58 PM
I looked in my bios and I didnt see anything about changing any of the memory settings... like i said my pc runs great.. never crashes, maybe I shouldnt worry about it
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.