Power supply

Forum Windows Vista : General Discussion Power supply

fan keep runing after new install. this is a 400w coolermaster. Installed in a Hp pavilion a6700w stock . no work load idle state. did have a minnor issue with the mobo connect 20/24 pin set up . 4 pin came loose . would like to se if there is any other input on this issue.

Message quoted 1 times

Reply to zallidor

zallidor wrote :

If it is like that, its OK. BTW the 4pin has 2 teeth to lock with 20pin to make 24pin.

------------------------------ Where there's smoke, there's fire...

Reply to Nikorr

Thanks that was it . Reseated the four pin and all was good. Thank for the reply . I like the fact that u included pic with answer.

Reply to zallidor

Older mobos come with 20pin and newer are 24pin, therefor u don't have to change the PSU if u upgrade the mobo, when it comes to that.

Reply to Nikorr

well the p/s was working fine and then the pc stops working . I went into the case re-seated the mobo cables starts up fine than stops working reseat the connectors agian works fine , got a call today not working agian . me think its mobo any ideas

Message quoted 1 times

Reply to zallidor

zallidor wrote :

Is it pushed in all the way?

------------------------------ Where there's smoke, there's fire...

Reply to Nikorr

BTW, post specs for the PC and how old is the PSU?

Reply to Nikorr

Calculate your Watt need @ http://educations.newegg.com/tool/psucalc/index.html

Let us know : )

Reply to Nikorr

Hp pavilion a6700w stock. had a 300 watt replacement is a 400 w . so 100w more then spec.
Processor
AMD LIVE!™ Made to Bring It All Together
• AMD Athlon™ 64 X2 Dual-Core Processor 4200+
• 2.2GHz, 512KB+512KB L2 Cache

Operating system installed
Genuine Windows Vista™ Home Premium

platform
AMD LIVE!™ Made to Bring It All Together

Chipset
NVIDIA nForce 430 Chipset

Standard memory
1024MB

Memory type
DDR2-SDRAM

Memory slots
4 DIMM (184-pin, DDR2) (two available)