No post No display

[doglips]

Putting old system together(old parts layin around) After putting together turn on no post but I get 1 long 2 short beeps. Googled and found video system error. I took out the video card put in this rig worked fine? Could this be a MB problem? The parts are A8N-E MB,4200X2,PQI 1GB,7600GT,TT430PSU.

 

[akhilles]

Try another psu.

 

[doglips]

Did that no difference.

 

[major53]

doglips could beisplay adapter problem (MDA, CGA 1 long beep 2 short beeps! are you useing vga adaptor or dvi adaptor.

check the connector on both ends of display cable,also the video connector to see if any pins may have gotten bent?

 

[righteous]

Sounds like a RAM issue to me. Anytime I have had this issue it is the failure to detect the ram. They say in a few places it could be the video, but I have never witnessed that.

 

[doglips]

Well I got it sorted out..Took all Hardware out of case.Fired up on bench and it booted fine! Don't know where it was grounding but reinstalled and all is fine.I do have problems running the PQI sticks.Get the dreaded beeps no boot thing every time.Did access Bios to correct settings for PQI memory but did not help, wont work witch is too bad because they are 2x1GB set.The OCZ that works are 2x512 set.Oh by the way Thanks for your help every one!