Tom's Hardware > Forum > Overclocking > Cooler and Heatsinks > E7200 Temp LEvels

E7200 Temp LEvels

Forum Overclocking : Cooler and Heatsinks - E7200 Temp LEvels

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Ask the community Add a reply
Word :    Username :           
 
adith   08-10-2008 at 12:05:45 PM

I ve just assembled a new rig .. E 7200 on a P35 board... i havent OCd yet... I used Realtemp 2.5 to get temp of my CPU...it shows an alarming 40 to 45 on idle.... NOTE:i ve not OCd yet and i Plan to do so... i'm in India and the room temp is indeed a little high... is this normal ??? or have i not installed the stock cooler properly ??

Add a reply
Sponsored Links
Register or log in to remove.
iluvgillgill   08-10-2008 at 12:09:34 PM
- 0 +

yes that is normal. but more importantly whats the load temp?

but make sure all pins is pushed in correctly!

Reply to iluvgillgill
adith   08-10-2008 at 02:17:04 PM
- 0 +

Normal eh ?? and how do u find the load temp ?? Run Crysis and check it out or wat ? enlighten me

Reply to adith
johnnyq1233   08-10-2008 at 02:47:32 PM
- 0 +

run prime 95 it loads the processor to almost 100%.
You can watch the the temps in realtemp 2.5 while the prime runs.
Here's the link for prime 95....http://files.extremeoverclocking.com/file.php?f=103
let us know what temps you hit..
*if you see the processor hitting 70C stop and let it cool down...that's too high!*

------------------------------ Intel C2D E8400 @3.0GHZ, Gigabyte GA-EP45-UD3L motherboard, 4GB OCZ vista platinum DDR2-1066 , Seagate320GBsataII 16MB HDD, BFG GTS250oc 512 GDDR3...3Dvision glasses and samsung 120HZ screen.
 Reply to johnnyq1233
murdoc   08-11-2008 at 04:14:03 AM
- 0 +

hmm.. that's interesting... my E7200 didn't surpass 30 degrees on boot and was at about 40-45 degrees on load. I believe it's the ambient temp causing the temps to go up.

Reply to murdoc
Ibasaka   08-11-2008 at 09:55:58 AM
- 0 +

At first my mobo wouldn't recognize my cpu so it ran around 19*c so I updated my bios (which fixed the recognision problem) and it started running at around 40-45*c (little to no load) and 50-53 under load (an hour of crysis lol) so I think that temp is fine (mines o'ced to 3GHz)


Message edited by Ibasaka on 08-11-2008 at 09:56:56 AM
Reply to Ibasaka
iluvgillgill   08-11-2008 at 09:56:01 AM
- 0 +

that temp you got now is fine. try increase the FSB and voltage see how high them temperature will get.

rememeber to run prime95 SMALL FFTS not large ffts or blend test.ok?

Reply to iluvgillgill
adith   08-12-2008 at 03:08:50 AM
- 0 +

by hw much can i expect my temp to rise if i OC it to 3 Ghz from stock 2.53....again...i'm using only the stock cooler...

Reply to adith
adith   08-12-2008 at 03:17:50 AM
- 0 +

just tested it now...it was around 59 C ... i stopped the test b4 it completed cos it was on 59 for a long time

Reply to adith
Ask the community Add a reply
Tom's Hardware > Forum > Overclocking > Cooler and Heatsinks > E7200 Temp LEvels
Go to:

There are 1129 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.386 seconds
Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
Related Topics
See all relatives topics
They won a badge
Join us in greeting them