Q6600 on AIR thread: POST RESULTS HERE

[LB_Specter]

Id like to start a post to see what some overclocking users are getting out of their Q6600 on air. Please follow the following format and include your validation from the cpu-z database.

http://valid.x86-secret.com/show_oc.php?id=401457

Core : Kentsfield (65 nm) / Stepping : G0
Freq : 3000.12 MHz (333.35 * 9)
Core Voltage: 1.296 NO VOLTAGE ADJUSTMENT
Motherboard: DFI Lanparty DK P35-T2RS
Case: Antec 1200
Cooler: Zalman 9700
Maxtemp: prime95 5hours 45C

Please use CPU-Z 1.46 http://www.cpuid.com/cpuz.php Run cpu-z. Then click VALIDATION on the ABOUT tab.
Run Prime95 and report your max temps and hours ran.
Please use RealTemp http://http://www.techpowerup.com/realtemp/ Run realtemp and report your highest cores max.

 

[Ararat]

This should be a good/interesting thread, BUT please include core voltage you used as this is probably the second most important piece of information after clock speed. Also include any other voltages raised.

 

[LB_Specter]

well, now thats interesting. I was under the impression the voltage would be indicated on the validation. I was wrong. thanks for the update. I will add this.

 

[JonathanDeane]

This interests me, I hope Santa will bring me a 6600 this Christmas lol

 

[skittle]

http://deep.phpwebhosting.com/~mactownkrisp/computer/desktop.png

3.2ghz
400*8
1.28v

*running 333*9 right now, ill validate it at 3.2 later*

 

[cmashwin]

Hi Guys.. This is my rig running 24/7.. Loaded temps max are at 61,, Idle at 42..

CPU Arch : 1 CPU - 4 Cores - 4 Threads
CPU PSN : Intel Core2 Quad CPU Q6600 @ 2.40GHz
CPU EXT : MMX SSE SSE2 SSE3 SSSE3 EM64T
CPUID : 6.F.B / Extended : 6.F
CPU Cache : L1 : 4 x 32 / 4 x 32 KB - L2 : 2 x 4096 KB
Core : Kentsfield (65 nm) / Stepping : G0
Freq : 3600.35 MHz (400.04 * 9)
Core voltage : 1.55v in BIOS.. In CpuZ, 1.448ish.. Loadline calibration Dsiabled.
Motherboard : ASUS P5KC latest BIOS
Cooler : TRUE with Thermaltake silent 120mm fan..

http://valid.x86-secret.com/show_oc.php?id=401502

 

[CompuTronix]

LB_Specter,

Ambient temperature can be a huge variable, so you should include it in your list.

Comp

 

[prow]

here is my validation stuff.

validation ID : 401662 the link http://valid.x86-secret.com/show_oc.php?id=401662

Core : Kentsfield (65 nm) / Stepping : G0
Freq : 3240.67 MHz (360.07 * 9)
Core Voltage: 1.425 (1.34 running, cpuz)
MB Model : Asus P5Q-PRO with bios version 0506.
Case: antec 900
cooler: XIGMATEK with retention bracket.
Max temp: prime95 15 hours 2 min, 57C. (ambient temp 85F)

 

[night_wolf_in]

http://valid.x86-secret.com/show_oc.php?id=401703

Core : Kentsfield (65 nm) / Stepping : G0
Freq ; 334*9
Core Voltage: 1.216
MB Model : DS3L
Case: cooler master C5
cooler: Zalman 9700NT
Max temp: prime95 15 hours 2 min, 60C.

 

[LB_Specter]

Im posting new results for 3.2GHZ. it took some doing but I finally primed for about 14hours with max temps of only 51C.

http://valid.x86-secret.com/show_oc.php?id=402018

Freq : 3197.69 MHz (355.3 * 9)
Core Voltage: 1.344 **Overclocked the CPU vid special add to +50.0mV http://www.overclock.net/attachment.php?attachmentid=66210&d=1203298992
Motherboard: DFI Lanparty DK P35-T2RS
Case: Antec 1200
Cooler: Zalman 9700
Maxtemp: prime95 14hours 51C