Display Adapter driver: downloaded from SiS website, version 6.14.10.3830 (10/3/2007)
Monitor driver: downloaded from Acer website, version 1.0.0.0 (8/4/2005)
The screen supports 1680x1050 max resolution, but when i set the resolution in Windows to that resolution, the screen appears to flicker at the top left corner, which is very irritating. Does anyone know how I can solve this problem? I obtained the latest drivers for the monitor and the graphics adapter (versions shown above), and it didn't really make a difference.
If i use this monitor on another computer that has a lower max resolution, (1440x900) it works fine.
Any help is greatly appreciated.
Time for a new graphics card sounds like. This is a desktop computer? If so make sure your cable from your video port (VGA) Im assuming is tight and screwed in on both ends. I had a flickering a while ago due to a lose DVI cable on the back of my monitor. set 60hz as the refresh rate too.
------------------------------Phen 2 955 @ 4 GHZ MSI 790FX AM3 Gskill 8Gb DDR3 1333 ATI 5870 1 Gb 2 x Velociraptors 600Gb Gateway 24" 1920 x 1200 DVI 32 GB Iphone 3GS and Blu Ray...life is good!
Reply to soldier37
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.