Hi guys.
I have 2 hdd in Raid 0 set up by my old p5Q pro's intel Matrix storage Raid controller. It's called Explosion, stripped in 128 kbs.
One day, while browsing stuff, my computer froze and had to reboot. No more post, no boot no nothing. Found out the MB was dead. I switched for Gigabyte GA-EP45T-UD3P also using ICH10R
I plugged the drives into the board and found out my raid setup was found. Problem is that the raid status has failed.
One of my 2 drives shows as "non-raid"
I know my drives are healthy. I just want to be able to repair and boot vista to get my data back.
If I ever get my data back, i'll use a third HDD for storage only.
Please help !
(I'm an intermediate level computer user)
edit : I don't recall in which port the hard drives where plugged in. P5Q pro ranges from 1 to 6 while Gigabyte's board vary from 0 to 5. I hope it won't be a problem
I have 2 hdd in Raid 0 set up by my old p5Q pro's intel Matrix storage Raid controller. It's called Explosion, stripped in 128 kbs.
One day, while browsing stuff, my computer froze and had to reboot. No more post, no boot no nothing. Found out the MB was dead. I switched for Gigabyte GA-EP45T-UD3P also using ICH10R
I plugged the drives into the board and found out my raid setup was found. Problem is that the raid status has failed.
One of my 2 drives shows as "non-raid"
I know my drives are healthy. I just want to be able to repair and boot vista to get my data back.
If I ever get my data back, i'll use a third HDD for storage only.
Please help !
(I'm an intermediate level computer user)
edit : I don't recall in which port the hard drives where plugged in. P5Q pro ranges from 1 to 6 while Gigabyte's board vary from 0 to 5. I hope it won't be a problem