prime95 torture test ?? give me bluescreen !! WTF help plz

[jc-r]

cpu ratio:9x

fsb frequency: 444

fsb nb :400

dram:888mhz 1:1

cpu voltage: 1.30v

pll http://en.wikipedia.org/wiki/Phase-locked_loop : 1.50v

fsb termination:1.50v

dram: 1.9v

NB: 1.50v

all others on <<auto>>

for a total of : 4 ghz lool



when i run prime95 with a torture test it give me a blue screen telling me << beginning of memoery dump>> someone can help me ??

it is normal ??

when i run prime95 in advenced-test it works but when i try torture it make a blue screen

 

[Silverion77]

Yes if ur oc is unstable u will get a BSOD.
Its normal
Just up voltages (most likely CPU voltage)

Use little steps, just to get it right

 

[Conumdrum]

Up your ram to 2.0 min, it will help.

 

[Silverion77]

If the ram is rated at 1.9v he should leave it at 1.9

Its not the ram necessarily, its most likely low cpu voltage. Happens all the time

 

[jc-r]

oki ty and should i put my ram to 888 mhz for a ratio of 1:1 or 1183 for a ratio of 3:4

1183 need 2.3v

888 need 1.8v

so i keep all my settings like that and i put more voltage on cpu ? how much u think ?

 

[calinkula]

System specs?

 

[jc-r]

i have :

cpu:E8400 dual core dual core 3 ghz
ram: ocz viper pc2-9200 2 gig 1150mhz 2.3v
video card video card : ati his hd 4870
motherboeard: p5q premium


in prime 95 i got a error at 12 min telling me this : FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.

 

[jc-r]

o i put voltage more higher at 1.33...v and now i got no blue screen only error in prime95 i think its a good step


mm do i need to put more vcore than that or more nb voltage or something else ?

im at 40 celsius with 1.33...V i can put a little more if i need

 

[jc-r]

i put it to 1.34375v

will try that tonight

 

[iluvgillgill]

i think you should really leave PLL value in auto.you dont know what you are adjusting.

 

[Silverion77]

If 1.33v was fine then leave it there...have Prime95 stress for a good 8 hours. Only add more voltage if needed, its silly to add uneeded voltage and create excess heat

 

[jc-r]

umm i 1.33 in p95 it make error but no bluescreen and no restart just when i am at 12 min of torture worker thread make 1 error and stop working

its when the 8 test come it make a FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.

i will try with 1.34v now to see how it work

 

[jc-r]

soo pll in auto ?

 

[iluvgillgill]

yes you do

 

[iluvgillgill]

i think you will need more then 1.5v on NB with that FSB!

 

[jc-r]

oki will do that thanks

with 1.34v all works for the moment, reached 15 min of torture

i think i found the best voltage now i will try it for 3 hours

 

[iluvgillgill]

a fully stable must pass 12 AT LEAST and 24hours for ultimate stability.

 

[jc-r]

how much you think on nb ?

 

[iluvgillgill]

can you list whats the range in the NB volts?

 

[jc-r]

mm i think its 2v max

i need to check in bios

 

[jc-r]

but why should i put more in nb ?? it works good presently no need to overheat my nb

i will try 12 hour and if i got a error or bluescreen or system restart i will put nb voltage more higher

 

[Silverion77]

12 hours lol no wonder were short on electricity

I do 8 hours but then again its all the same
As long as u dont play for 9 hours + straight 8-12 is all u need time wise, anymore is just redundant

 

[jc-r]

lol i dont play crysis more than 4 hour and its REALY RARE most of the time i play 2 hour

so i just need 4 hour stable ?

 

[jc-r]

and, personnaly i dont stress my cpu like p95 do when i play hehe


soo i think i will be ok with 4-8 hour of p95 and after this i will can call my system stable

4 ghz 41 celsius and on crysis 53 celsius i think thats really good
with prime i got only 64 celsius

 

[jc-r]

umm on probe 2, vcore is on 1.30v but on bios i puted it to 1.34v

curious..