Ads

Tom's Hardware > Forum > Overclocking > CPUs > Post your overclocked cpu 3d mark 06 cpu scores!

Post your overclocked cpu 3d mark 06 cpu scores!

Forum Overclocking : CPUs Post your overclocked cpu 3d mark 06 cpu scores!

AMD

Post your overclocked cpu model and clock with your 3d mark 06 cpu scores!

example

e4300 @ 333x9 = 2.99ghz

CPU score = 2475

Thanks

Monk

Reply to Roasted_Monk

E7200 @ 400Mhz = 3.8Ghz

cpu: 3446

Message quoted 1 times

------------------------------ Q6600@3.6ghz, GA-EX38-DS4 motherboard, 8gb 800mhz ddr2 4-3-3-12, 8800GTS(g92)@780mhz, 1TB + 1.5TB hdds, 850watt psu
Reply to dagger

dagger wrote :

http://ourworld.cs.com/dagger9066/screenshot002.jpg

Fook Me! And for only $189 for the Q6600 where I shop. Hmmmm. What are the success rates for the those hitting your clock speed?

Monk

Message quoted 1 times

Reply to Roasted_Monk

Roasted_Monk wrote :

Fook Me! And for only $189 for the Q6600 where I shop. Hmmmm. What are the success rates for the those hitting your clock speed?

Monk

If you have a decent motherboard and air cooler, 100%.

Message quoted 1 times

------------------------------ Q6600@3.6ghz, GA-EX38-DS4 motherboard, 8gb 800mhz ddr2 4-3-3-12, 8800GTS(g92)@780mhz, 1TB + 1.5TB hdds, 850watt psu
Reply to dagger

Wow, 1.5V is uber high, i only need 1.3875 in bios (reads 1.36 in cpu-z and speedfan) for 3.6ghz. I'm on an arctic freezer pro 7, and I idle in the mid to upper 40's and my highs are in the low 60's

Message quoted 1 times

Reply to w153r

dagger wrote :

If you have a decent motherboard and air cooler, 100%.

Very nice. My GA 965P-s3 will only support up to 1333 fsb so 3.0 ghz at the 9 multiplier will be the most I could get out of it right now. But I could always upgrade the mobo later and then squeek out that last .6ghz. Looks like that chip could keep me going for another 2 years.

Monk

Reply to Roasted_Monk

Q9450 @ 400mhz = 3.2ghz (no voltage increase)

CPU Score = 4716

http://service.futuremark.com/compare?3dm06=7957161

------------------------------

http://valid.x86-secret.com/cache/banner/377091.png

NZXT Apollo PCP&C Silencer 610 watt
VisionTek 4870x2
Seagate 7200.10 500gb
Reply to sciggy

w153r wrote :

Wow, 1.5V is uber high, i only need 1.3875 in bios (reads 1.36 in cpu-z and speedfan) for 3.6ghz. I'm on an arctic freezer pro 7, and I idle in the mid to upper 40's and my highs are in the low 60's

http://i530.photobucket.com/albums [...] ttings.jpg

But is it prime95 small fft stable? I used 1.45 vcore initially, but prime95 hit error and paused after only a little more than 18 hours. Pumped up the vcore just to be sure.

Q6600 tolerates higher voltage. Intel's official recommended voltage range is up to 1.5v, compared to around 1.3v for others.
http://processorfinder.intel.com/d [...] Spec=SLACR

As for score, background load matters, A LOT. Most people running q6600 at 3.6ghz will get much more than 4800. My Windows Vista Ultimate 64bit is filled with all kinds of third party bloatware in addition to the heavy os, with 1.5-2gb ram usage at idle.

Message edited by dagger on 09-19-2008 at 08:36:42 PM

------------------------------ Q6600@3.6ghz, GA-EX38-DS4 motherboard, 8gb 800mhz ddr2 4-3-3-12, 8800GTS(g92)@780mhz, 1TB + 1.5TB hdds, 850watt psu
Reply to dagger

the best i ever did was about 5500 with my q6600 at 3.8ghz using windows xp. i'll post a screen shot when i get home from work.

well, since every one is posting intel, i will post AMD.

athlon x2 4400+ @2.9Ghz vcore: 1.3v 3dmark 06: 2240

Reply to daft

well, since every one is posting intel, i will post AMD.

athlon x2 4400+ @2.9Ghz vcore: 1.3v 3dmark 06: 2240

SUPER LOW IMAO... well I have a athlon 64 4000+ @2.2Ghz ... yup no need to say anything about the 3dmark..

Reply to wgdz

im fairly certain it would get about 1790 if im not mistaken

Reply to daft

my Q6600 at 3.8g, 5850 score, air cool
http://service.futuremark.com/resu [...] ultType=14

Reply to liubros

q9550 @ 3.85 ghz

6135

Reply to thogrom

q6600, 450x8 3.6ghz

5100

Reply to clownbaby

Let's represent the low end, shall we?

E2180 @3.2 Ghz:
2664

It's a bench I ran a while back, I can't upload result's cause IE8 F***ed up my XP x64 installation. (I always used FF Btw, just wanted to check out IE8)

Message quoted 1 times
Message edited by Shadow703793 on 09-20-2008 at 01:21:12 AM

------------------------------

http://farm5.static.flickr.com/4113/5052517574_1d0ebc741b.jpg

Reply to Shadow703793

Best bench stable i can get outta my E8400 @ 4.4Ghz is 4095.

Reply to closed_deal

Best i've gotten was 4828 at 3.45ghz on my Q6600.

I have since tweaked it to 3.2ghz 1600fsb because of weird motherboard issues. I now get about 4500 give or take a couple points.

------------------------------

http://i13.photobucket.com/albums/a280/Werak/THFSig.jpg

Reply to lucuis

Q9650 @3.6 = 5369.

Reply to MARSOC_Operator

ci7 920 at 4.2 Ghz + turbo and HT = 7517 CPU Score

Overall score 26400

http://img229.imageshack.us/img229/4207/26400.png

Reply to omgitzfatal

amd x2 5200+ @3.1GHz

CPU Score: 2231

------------------------------

http://valid.canardpc.com/cache/banner/1017289.png

Reply to yaang

C2D E6750 @ 3704 MHz = 3217

i7 920 @ 3.9 Ghz no HT = 6118

overall score of 24508

Message quoted 1 times

------------------------------ Antec P182, i7 920 3.8Ghz @ 1.325V, Xigmatek 1283, Asus P6T X58, 3 x 2048MB OCZ Plat DDR3 1600 RAM, 2 EVGA GTX260 Core 216 in SLI, WD 160gb,320GB 1TB WD Black. Corsair 750TX. Acer 24" Monitor. Vista x64 Home Premium.
Reply to one-shot

one-shot wrote :

C2D E6750 @ 3704 MHz = 3217

i7 920 @ 3.9 Ghz no HT = 6118

overall score of 24508

3DMark Vantage Score P14631
CPU Score 15135
Graphics Score 14471

Here is a link to my 3DMark Vantage
http://service.futuremark.com/resu [...] ultType=19

Now my 3Dmark06 Result ( Higher than Vantage)
http://service.futuremark.com/home.action

3DMark06 Score 20330
SM 2.0 Score 8328
SM 3.0 Score 9847
CPU Score 5096

UPDATE (FEBRUARY 15, 2006) I've overclocked it back to 3.86Ghz I would be 24879 and If I overclocked it back to 4.0Ghz it would be 26307. I did some benchmark test about 4 times and got the results. I was happy with 26307

Damn that is Excellent scores. Plus if you like to see what I have in my system here is a link to my youtube video

http://www.youtube.com/watch?v=9jsRlhA3xSo

and the building process video

http://www.youtube.com/watch?v=YQsrDYiFptE

Cooling Type: AIR

Intel Core i5 750
Windows 7 (6.1) Ultimate Edition (Build 7600)
CPU Arch : 1 CPU - 4 Cores - 4 Threads
CPU PSN : Intel Core i5 CPU 750 @ 2.67GHz
CPU EXT : MMX, SSE (1, 2, 3, 3S, 4.1, 4.2), EM64T, VT-x
CPUID : 6.E.5 / Extended : 6.1E
CPU Cache : L1 : 4 x 32 / 4 x 32 KB - L2 : 4 x 256 KB
CPU Cache : L3 : 8192 KB
Core : Lynnfield (45 nm) / Stepping : B1
Freq : 3320.08 MHz (166 * 20)
MB Brand : Gigabyte
MB Model : P55-USB3
NB : Intel DMI Host Bridge rev 11
SB : Intel P55 rev 06
GPU Type : Radeon HD 5850
GPU Clocks : Core 157 MHz / RAM 300 MHz
DirectX Version : 11.0
RAM : 4096 MB DDR3 Dual Channel
RAM Speed : 664 MHz (2:8) @ 9-9-9-24
Slot 1 : 1024MB (10700)
Slot 1 Manufacturer : Crucial Technology
Slot 2 : 1024MB (10700)
Slot 2 Manufacturer : Crucial Technology
Slot 3 : 1024MB (10700)
Slot 3 Manufacturer : Crucial Technology
Slot 4 : 1024MB (10700)
Slot 4 Manufacturer : Crucial Technology

Now going to do a 3DMark06 benchmark

Message edited by Keiki646 on 02-16-2010 at 05:11:51 AM

Reply to Keiki646

Shadow703793 wrote :

Let's represent the low end, shall we?

E2180 @3.2 Ghz:
2664

http://farm4.static.flickr.com/305 [...] c25c_o.png

It's a bench I ran a while back, I can't upload result's cause IE8 F***ed up my XP x64 installation. (I always used FF Btw, just wanted to check out IE8)

strange i get 2707 with my e2160 @2.6

Reply to lecky2010

Ask the community Add a reply

Related content

See all topics related to "Post your overclocked cpu 3d mark 06 cpu scores!"

Tom's Hardware > Forum > Overclocking > CPUs > Post your overclocked cpu 3d mark 06 cpu scores!

Go to:

Help |
Forum rules

There are 1473 identified and unidentified users. To see the list of identified users, Click here.

Page generated in 0.714 seconds

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel