805 D will it run on a P35 chipset?

[swtguy]

I'm going to buy an e6750 in the near future and wanted to get an intel p35 motherboard for the higher fsb. However I currently have an 805d and cant afford the mb and the chip. I realize the p35 is for 800mhz and up fsb and the 805d is 533. However I have been running mine oced at 3.6ghz(800mhz) ever since I got it, does this mean i could get a p35 motherboard and my 805 d would work in it? Sorry if this is a stupid question. Thanks.

 

[endyen]

None of the asus P35 boards seem to be on thier list for the 805
http://support.asus.com/cpusupport/cpusupport.aspx?SLanguage=en-us
That could change though.

 

[jimmysmitty]

Thats strange that it doesn't show support for the 805 but it supports the 820. I would almost think it would since they are all the same chip with just different frequencies but if a support page doesn't list it it might not.

 

[cdgsax]

Yeah, the lowest Pentium D 800 Series CPU that will run on a P35 chipset board I've seen is the Pentium D 820. As endyn said, it could change, but I doubt it IMO

 

[jbj190]

All Pentium D CPUs should run on p35 boards.

 

[joefriday]

It seems not all P35 boards will support 533 bus processors. Odd.

 

[mi1ez]

My Pentium D runs fine on my P35, although it is a 800MHz FSB

 

[badge]

As some have stated, My 805 D has a 533MHz BUS, which is not supported by the P35 chipset according to Intel support. The 805 D is the only Pentium D CPU with the 533MHz BUS. Only the 800MHz Pentium D processors would be supported by P35.

http://processorfinder.intel.com/details.aspx?sSpec=SL8ZH

http://www.intel.com/products/chipsets/p35/index.htm

 

[jimmysmitty]

I believe the difference is with high voltage on the 805.

That seems right. I know the firstfew Pentium D's had a much higher voltage and the P35 chipset was designed mainly around the Core2 architecture which uses considerably less voltage than the Pentium D's.

 

[chunkymonster]

I'm going to buy an e6750 in the near future and wanted to get an intel p35 motherboard for the higher fsb. However I currently have an 805d and cant afford the mb and the chip. I realize the p35 is for 800mhz and up fsb and the 805d is 533. However I have been running mine oced at 3.6ghz(800mhz) ever since I got it, does this mean i could get a p35 motherboard and my 805 d would work in it? Sorry if this is a stupid question. Thanks.

Your best bet is to decide which, or choose, a P35 mobo you want and then see if the 805 is on the list of supported processors. All mobo makers list what procs are supported by each mobo they make.

 

[lolitha]

not sure it wil work because of the FSB 533

 

[hairycat101]

All Pentium D CPUs should run on p35 boards.

The 805 is the only PD that has a 533 FSB. I think you might want to know that. Therefore, this is a valid question. The 805 is different.

chunkymonster... your avatar gives me bad dreams.