Micro ATX questions!

[Prkchpsndwiches]

I need a Micro ATX board with an eSATA port and that can use my existing RAM if possible. My RAM is DDR2 800 4-4-4-12 2.1v TWIN 2X 1024 - 6400 C4 Corsair. Most mATX boards seem to use 1.8v. Any help would be great!

Prk

 

[Prkchpsndwiches]

It seems RAM is not as expensive these days. I found some compatible for $58. Might just go for that instead!

EDIT Well seems I am able to answer some of my own question here as well. Gigabyte list my ram as compatible http://www.gigabyte.com.tw/FileList/MemorySupport/motherboard_memory_ga-73pvm-s2h.pdf but corsairs memory configurator does not. I emailed corsair just for confirmation.

 

[chookman]

In anycase it should work as you should be able to change the RAM voltage supplied in the bios anyways

 

[cisco]

That Corsair should work. I haven't had any board yet that it wouldn't work on. I built a bunch of systems for people and used it with several different board makers without any problems. If there were a problem, you should be able to change the voltage in the bios.

 

[EXT64]

Here's one, complete with eSATA and memory voltage control:

http://www.newegg.com/Product/Product.aspx?Item=N82E16813128090

It's an AMD board though. I don't know what you want exactly.

 

[Prkchpsndwiches]

Ahh yeah I should have mentioned. E6700... so intel thx though EXT64. The only other snafu I have encountered is the 8800gtx fits in the Thermaltake Lanbox, but I guess I have to unscrew the hardrive cage. What else can I use to fasten it to the bottom? Double-sided tape?

 

[DatmanII]

GIGABYTE GA-G33M-DS2R Intel G33 Bear Lake mATX Motherboard

http://www.dragonsteelmods.com/index.php?option=com_content&task=view&id=5048&Itemid=38

Just got this myself.