[CENTER][B]Setting ADSL Internet on a computer + disel TV Details With photo [/B]
[B]Setting the D-Link DSL-2500U (DSL-2540U) [/B]
[B]
Setting ADSL Internet [/B]
To access the settings of the modem must first configure the network adapter. In his settings, set the following settings:
Now you can begin configuring the modem:
1.Predpolagaetsya that all the settings for the modem displayed by default. If not, then reset your settings, click the Reset button on the rear of the modem and hold it about 20 seconds (for more information on clearing the modem to factory settings, refer to the instruction manual for your modem).
2. open your browser (default in Windows uses Internet Explorer) and then type in the address bar http://192.168.1.1. You should see a box with the invitation to enter the Login Name and Password. Enter a word in both write admin and click Login.
Note.
If no page is opened, check off whether you use a proxy server (in IE, you can see where to go to Tools, Internet Options, Connections, Setting LAN).
3. If login and password correctly, you will be redirected to a page HOME menu modem. Click WAN.
7. On the next page in the fields of PPP Username and PPP Password enter your login and password specified in the registration card. Put a checkmark «Keep Alive» and click NEXT.
Attention! When selecting a password pay attention to the letter case. The keyboard should be in writing English letters.
8. On the next page, leave all the default settings and click NEXT.
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.