Tom's Hardware: Topic Why Adaptec 29160 Ultra 160 is only running at 40 Sync
Tom's Hardware > Forum > Storage > NAS/RAID & Technologies > Why Adaptec 29160 Ultra 160 is only running at 40 Sync
Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions.
Sign up now! Its free!
Hi,
Can anybody tell me why my Adaptec 29160 Ultra 160 controller card is picking up my scsi drives as only 40 Sync and not 160.
Its connected to a bay that can take 5 scsi drives.
Both is connected via a 68pin cable.
I have used all 3 connectors on the card.
It has 2 in front next to each other and the other one is connected at the back of the pc.
In the Adaptec utility settings it shows 160, but when it detects the drives it only pics up 40 Sync.
Why?
Please help
Please mind
You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.
Sponsored links
Ad
Related Topics
- SATA Samsung 320GB only showing 130GB
- Recovery of info from 40gb running windows xp
- What would cause a RAID0 to become Unallocated?
- Data recovery from old IDE hdd running xp onto a new dell mobo that only has SA
- Running Win 2k Pro with Asus P5SD2-X motherboard
- 160 GB IDE HDD
- SATA drive supports UDMA Mode 7 but only runs in Mode 5
- 500Gb HD dietected as 128 GB only in Windows
- Configure RAID prompt (only one drive)?
They won a badge
Join us in greeting them
- 01:00 clavote won the Freshman badge
- 01:00 Appzalien won the Freshman badge
- 01:00 kellyB won the Uniformed badge
- 20:16 barryegerber won the Sophmore badge
- 01:00 micron won the Freshman badge
- 01:00 Jawbreaker won the Freshman badge
- 01:00 karizmar won the Uniformed badge
- 19:05 fihart won the WiFi badge
- 01:00 master_dk won the Uniformed badge
- 01:00 masachre13 won the Uniformed badge