Tom's Hardware > Forum > Homebuilt Systems > General Homebuilt > No Post Help PLZZZ!!!

No Post Help PLZZZ!!!

Forum Homebuilt Systems : General Homebuilt - No Post Help PLZZZ!!!

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Ask the community Add a reply
Word :    Username :           
 
klobnitrones   03-09-2008 at 05:51:44 PM

I just bought a computer at a rummage sale and it worked fine untill i moved it to my antec 900 case and now i believe it is not posting because the bios won't even boot or show up on the screen plz help

------------------------------ Pentium D 820 2.8Ghz
Pny 7900 GS ocd to 600/1650
Passive liquid cooling
3 gigs PC 5300
Add a reply
Sponsored Links
Register or log in to remove.
klobnitrones   03-09-2008 at 06:16:38 PM
- 0 +

also when turned off but plugged in the hdd led is on solid

Message quoted 1 times
------------------------------ Pentium D 820 2.8Ghz
Pny 7900 GS ocd to 600/1650
Passive liquid cooling
3 gigs PC 5300
Reply to klobnitrones
JPain   03-09-2008 at 06:24:25 PM
- 0 +

It´s totally dead? It does not start at all??

power switch is on right plaze?


Message edited by JPain on 03-09-2008 at 06:25:49 PM
Reply to JPain
derek85   03-09-2008 at 06:27:12 PM
- 0 +

HDD LED is not supposed to be on when mobo is off, you sure you plugged everything in right place?

Reply to derek85
klobnitrones   03-09-2008 at 06:28:30 PM
- 0 +

it turns on but nothing comes on the screen and the hard drive spins but doesn't load. and the same with the cd drive but it worked before transfer

------------------------------ Pentium D 820 2.8Ghz
Pny 7900 GS ocd to 600/1650
Passive liquid cooling
3 gigs PC 5300
Reply to klobnitrones
JPain   03-09-2008 at 06:38:42 PM
- 0 +

start from zero and pull all out...
and then 1 componet at time... you can try starting your system after connectin hdd or memory... there will be different errors....

memorys thigh? 4-pinn power? wrong usb pluging?


Message edited by JPain on 03-09-2008 at 06:47:54 PM
Reply to JPain
boonality   03-09-2008 at 06:49:11 PM
- 0 +

klobnitrones wrote :

but plugged in the hdd




I guess I'm twisted, I busted up laughing when I read this.

I would take everything out of the case and start over, it sounds like you have a connector either not seated correctly or plugged into an incorrect area, or you are shorting out somewhere.

------------------------------ Exchange Engineer - Why is it that when DNS goes down everyone thinks it's my exchange server?

Oh ya, email is the heart of work.
 Reply to boonality
klobnitrones   03-09-2008 at 06:52:36 PM
- 0 +

fixed led

------------------------------ Pentium D 820 2.8Ghz
Pny 7900 GS ocd to 600/1650
Passive liquid cooling
3 gigs PC 5300
Reply to klobnitrones
klobnitrones   03-09-2008 at 06:53:58 PM
- 0 +

it has inte grated graphics so why wont even the bios show up though

------------------------------ Pentium D 820 2.8Ghz
Pny 7900 GS ocd to 600/1650
Passive liquid cooling
3 gigs PC 5300
Reply to klobnitrones
klobnitrones   03-09-2008 at 06:54:35 PM
- 0 +

srry im kinda mad and cant type

------------------------------ Pentium D 820 2.8Ghz
Pny 7900 GS ocd to 600/1650
Passive liquid cooling
3 gigs PC 5300
Reply to klobnitrones
Shadow703793   03-09-2008 at 07:10:08 PM
- 0 +

^Please post more specs. (ie, CPU, Motherboard, etc)

------------------------------ http://farm3.static.flickr.com/2617/3815217176_0a5be7955d_o.gif
http://farm4.static.flickr.com/3553/3818083596_1a772f7162_o.gif
 Reply to Shadow703793
klobnitrones   03-09-2008 at 07:15:06 PM
- 0 +

i dont know models but 2. 66 Ghz P4 prescott, asrock P4VM8, 256 MB ddr 333, intel integrated graphics, 350 watt psu

------------------------------ Pentium D 820 2.8Ghz
Pny 7900 GS ocd to 600/1650
Passive liquid cooling
3 gigs PC 5300
Reply to klobnitrones
ohiou_grad_06   03-09-2008 at 08:23:03 PM
- 0 +

Your monitor is good right? You may consider going to a local pc shop, see if they have an old used card, agp or pci card that they'd sell you cheap, just to make sure the integrated graphics didn't die on you.

Reply to ohiou_grad_06
klobnitrones   03-09-2008 at 09:16:54 PM
- 0 +

but the hdd is spinning but not loading i have an agp card that i dropped in to test it and it didnt work either

------------------------------ Pentium D 820 2.8Ghz
Pny 7900 GS ocd to 600/1650
Passive liquid cooling
3 gigs PC 5300
Reply to klobnitrones
mtyermom   03-09-2008 at 10:03:03 PM
- 0 +

That's an old system, the motherboard may have been damaged in the transfer.

Reply to mtyermom
klobnitrones   03-11-2008 at 01:13:52 AM
- 0 +

thanx

------------------------------ Pentium D 820 2.8Ghz
Pny 7900 GS ocd to 600/1650
Passive liquid cooling
3 gigs PC 5300
Reply to klobnitrones
Ask the community Add a reply
Tom's Hardware > Forum > Homebuilt Systems > General Homebuilt > No Post Help PLZZZ!!!
Go to:

There are 904 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.382 seconds
Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
Related Topics
See all relatives topics
They won a badge
Join us in greeting them
How do I win badges?