Raid 10 problem

[pavelperson]

ga-ma790fx-dss f2
phenomen
new WD caviar 4 hdd in raid 10 configuration
raid bios 2.5.1540.36

on load it gives me
id#1
2x2 raid 10
640136mb
track mapping
65535/255/63
functional

i got myself 4 hard drives for raid system
set it up,
went into bios
it is single "harddrive" in boot priority menu as scsi-0 raid ary1
set up my cdrom to be first device to boot from
and now when i tried to install windows it gave me
upon trying to boot from cd
DISK BOOT FAILTURE, INSERT SYSTEM DISK AND PRESS ENTER


I AM IN THE DEAD END, and dont know what to do, if anybody familiar, please walk me through.

 

[pavelperson]

ga-ma790fx-dss f2
phenomen
new WD caviar 4 hdd in raid 10 configuration
raid bios 2.5.1540.36

on load it gives me
id#1
2x2 raid 10
640136mb
track mapping
65535/255/63
functional

i got myself 4 hard drives for raid system
set it up,
went into bios
it is single "harddrive" in boot priority menu as scsi-0 raid ary1
set up my cdrom to be first device to boot from
and now when i tried to install windows it gave me
upon trying to boot from cd
DISK BOOT FAILTURE, INSERT SYSTEM DISK AND PRESS ENTER


I AM IN THE DEAD END, and dont know what to do, if anybody familiar, please walk me through.

do i have to have pins plug in, into sata hdd in raid system?

 

[zapf]

Just to confirm. You got "DISK BOOT FAILTURE, INSERT SYSTEM DISK AND PRESS ENTER" when booting from the Windows CD? Are you totally sure? Because if that is the case its nothing to do with the RAID. Yet.

 

[pavelperson]

its not about that now, got that portion fixed,
now my motherboaed does not see raid disk
all hard drives working properly and i even tried to use fresh drivers from gigabyte webpage, even updated bios
i am desperate now, and probablt will have to get raid card this week, pulled out too much hair out of my scalp