Sign in with
Sign up | Sign in
Your question

GeForce6100PM-M2 won't overclock :(

Tags:
  • Elitegroup
  • Overclocking
  • ECS
  • Motherboards
Last response: in Motherboards
Share
May 19, 2008 4:34:12 PM

Hi,

I am running an AMD 6000+ on my new GeForce6100PM-M2 ECS MB. With this processor on previous Asus MB's I was able to get to 3.3 Ghz stable with ease. However, on this ECS board, if I go above 3.075 GHz, it won't boot.

I see that with this board you cannot increase the voltage at all. Is that the problem, am I doing something else wrong or does this board just suck?

P.S., Does ECS have a tech support phone number in the USA? I cannot find one.

More about : geforce6100pm overclock

May 19, 2008 4:58:13 PM

It's a pretty lame board, with an even lamer chipset.
May 19, 2008 5:12:14 PM

It's a pretty lame board, with an even lamer chipset.
Related resources
May 19, 2008 5:17:38 PM

Agree with the double post, I bought a 939 version of that chipset from Biostar, couldnt get more than about 50Mhz OC on the processor, just not built for overclocking.
February 5, 2010 10:07:23 AM

i`m having the same mobo , whith a amd sempron 3200 + Manilla (1.8 Ghz stock)...i`m keeping i in 2.3 Ghz :bounce:  , whith ease........that`s means 400 Mzh.....and 2X512 Kingmax...and it work pretty well...
it`s quite a good motherboard
!