Cant run 16-bit windows program insufficient memory to run this application

Anonymous

Memory Expert

August 13, 2010 2:54:49 PM

give the information to me about this problem.
can't run 16-bit windows program.
Insufficient memory to run this application.Quit one or more windows application and then try again.

I need answer to this question.

More about : run bit windows program insufficient memory run application

| E-mail me updates
| Report abuse

Saga Lout

August 14, 2010 6:18:58 AM

Quote:

give the information to me about this problem.
can't run 16-bit windows program.
Insufficient memory to run this application.Quit one or more windows application and then try again.

I need answer to this question.

[#0005ff]You almost certainly have enough memory but XP gets confused when faced with a 16 bit programme because it uses 32 bit memory differently. To work around this, right click the main executable file of the proramme and go to Compatibility Mode. Select Windows '98 and see if that gets the utility going.[/#000ff]

| Report abuse

VISTA_620

October 17, 2012 6:07:45 AM

i also face the same problem. After i select compatibility mode to Window '98, the problem still remain. Any other solution?

| Report abuse

Saga Lout

October 17, 2012 8:27:36 AM

VISTA_620 said:

i also face the same problem. After i select compatibility mode to Window '98, the problem still remain. Any other solution?

Hello and welcome to Tom's Hardware Forums.

Which programme is causing you this problem?

| Report abuse

Hawkeye22

Memory Expert

October 17, 2012 12:22:10 PM

It's probably an older program that requires EMS (expanded memory). Right click the program and look at the memory tab. You should see expanded memory (EMS), extended memory (XMS) and MS-DOS protected mode (DPMI) memory. If you are missing the EMS, it may not run. Make sure himem.sys is being loaded in your config.nt file as well as dos=high,umb.

| Report abuse