Tom's Hardware > Forum > Overclocking > Motherboards > Q6600 on p35ds3l, no more then 400 fsb
Ask the community Add a reply
Word :    Username :           
 
jaibot18   12-21-2008 at 07:54:55 PM

ok, so im running a q6600 on a p35-ds3l and i can get it to 3.6 easy with 45c load temps. Needless to say i want to get it higher but the fsb is limiting me, as when i thy to boot at 415 fsb, no matter what multi, it has a hard time getting into windows.
My question is this, do i need to overvolt the fsb and the northbridge to get it to 425 fsb? What type of cooling should i have on the northbridge for this> ?

Add a reply
Sponsored Links
Register or log in to remove.
Huttfuzz   12-21-2008 at 08:26:40 PM
- 0 +

I would think a NB voltage increase is what you need. You can put it up to 1.35 or 1.4 no need for other cooling solution. Try that and you should be able to bump your FSB. Also boost the CPU Termination voltage (or CPU FSB voltage, they call it differently depending on your BIOS.) This can be boost to 1.4 as well without problem. Try that.

Reply to Huttfuzz
jaibot18   12-21-2008 at 09:21:30 PM
- 0 +

ok, thanks
im trying to get to 4ghrz, ill do it over break

Reply to jaibot18
Ask the community Add a reply
Tom's Hardware > Forum > Overclocking > Motherboards > Q6600 on p35ds3l, no more then 400 fsb
Go to:

There are 800 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.237 seconds
Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
Related Topics
See all relatives topics
They won a badge
Join us in greeting them
How do I win badges?