I have a gigabyte ep35c-ds3r mobo, and it the first time i went for a gigabyte board, have read the manual and have applied a Artic cooler extreme cpu freezer, i have a sli x 8800GTS 640mb+320mb (320mb @ physics only setting!).
My ram is Kingston HiperX 1066MhZ and it currently @ 800Mhz - setting by the bio's ,
My processor is a e4600 stock setting @ 200cpu ratio (2.40GhZ) - (memory mutiplier @ AUTO-loads@ 800MhZ) oviously my new grand theft auto game was'nt running smoothly and needed to overclock this cpu so memory is quicker, i contacted gigabyte and they said put my FSB @ 266 (3.20GhZ) and memory mutiplier @ 4.0+, which leaves the system and Vcore voltage @ 1.418 and system should boot stable in most cases's!,
But yet mine dont when i set it to that it loads into windows for 5 mins then bsods, Is this a voltage problem or what cause im new to the gigabyte auto- bios, i know what they all mean as i read manual but what i dont no is how to get windows stable @ 3.20Ghz as the cooling is fine is bsods due to something else>
Any help?
My ram is Kingston HiperX 1066MhZ and it currently @ 800Mhz - setting by the bio's ,
My processor is a e4600 stock setting @ 200cpu ratio (2.40GhZ) - (memory mutiplier @ AUTO-loads@ 800MhZ) oviously my new grand theft auto game was'nt running smoothly and needed to overclock this cpu so memory is quicker, i contacted gigabyte and they said put my FSB @ 266 (3.20GhZ) and memory mutiplier @ 4.0+, which leaves the system and Vcore voltage @ 1.418 and system should boot stable in most cases's!,
But yet mine dont when i set it to that it loads into windows for 5 mins then bsods, Is this a voltage problem or what cause im new to the gigabyte auto- bios, i know what they all mean as i read manual but what i dont no is how to get windows stable @ 3.20Ghz as the cooling is fine is bsods due to something else>
Any help?