I have an Asus M2N MX SE motherboard. Yesterday, my 1 GB DDR2 667mhz memory went bad. So today I went to buy new one. There in the shop I saw a cheap bundle of 2x2GB DDR2 800mhz RAM modules (so, total 4GB RAM!).
Since I had lost my motherboard manual, I downloaded it from the internet(http://dlsvr01.asus.com/pub/ASUS/mb/socketAM2/M2N-MX%20SE/e3168_m2n-mx_se.zip). But unfortunately, the manual says that it supports only 2GB maximum memory, and each module supports 1GB maximum(total 2 modules)...So I seached for review of my motherboard on the internet, and in many of those reviews said that it supports 4GB max! While some review said 2 GB max! I am totally confused now and not sure what to do as the salesman at the shop says they wont take back the RAMs bought once they sold it.....So, my question is, does my motherboard actually supports this much memory? Has anyone with same motherboard model experience the same situation?
Please HELP!
I'm currently using this board with 2x1GB of GSKILL DDR2 and am looking to upgrade to a full 4x1GB myself.
Under advisement of a friend, I wanted to check to see if it'll register the full 4GBs or if it'll just see 3 of them like some other ASUS motherboards that claim to handle 4GBS.
I can't find anything online about it not handling the full 4GBs, so I'm going to purchase the other set of 2x1s and install them. Once I do I'll post again and let you know how it handled it.
4 gig max, if you are running 32bit OS then virtual ram is 2gig and PAE is from 1 to 2 gig depending on the mobos onboard features. Most MoBos will be from 3.0-3.25g seen by OS on 32 bit.
IE if a mobo has a 8g max even if you populate to the max on a 32bit OS you will only see 3 to 3.25 gig.
4 gig max, if you are running 32bit OS then virtual ram is 2gig and PAE is from 1 to 2 gig depending on the mobos onboard features. Most MoBos will be from 3.0-3.25g seen by OS on 32 bit.
IE if a mobo has a 8g max even if you populate to the max on a 32bit OS you will only see 3 to 3.25 gig.
yes it supports 4 gigs of ram. i found the manual for it and it clearly says it supports up to 4 gigs of unbuffered ram 1066/800/667/533 MHz DDR2
Message edited by Exit on 02-24-2009 at 01:19:13 AM
i am also using asus M2N-MX-SE, ugud shows that it support 2 gb but on inet i foung that it support 4GB so frds i m also confused, please if anybody using 4 gb with this MOBO so please tell me .
I was just reading ur comment on the site www.tomshardware.com...... I am also using a m2n-mx-se plus mother board ..........
I m also using 2x1 ram but it dont works nd it uses on 2gb of ram .....
No need of buying 2x1 another buy the 4x1 only it will handle the power of 4GBS......
So Go For It........
U can contact me on river90stone@yahoo.com..........
Take Kare.........................
Hi.
i'm Venkatesh Kumar from India.
i have M2N-MX-SE-PLUS BOARD and i'm using 3 gb of ram (2gb X 1, 1 GB X 1 ) . Windows does not support more than 3 GB of Ram.