Is my overclocking ok?

Nuxly Stardust

Distinguished
Dec 5, 2008
6
0
18,510
Hello there, I've read many tutorials about overclocking and tried to overclock my CPU and memory, increasing progressively the values.

Default settings [2.66Ghz] :
FSB: 1333Mhz
Memory: 667Mhz
Memory CAS#: 5
CPU Multiplier: 8.0
CPU Voltage: 1.30V

New settings [2.66Ghz] :
FSB: 1595Mhz
Memory: 797.5Mhz
Memory CAS#: 4
CPU Multiplier: 8.0 (Locked)
CPU Voltage: 1.30V (Untouched)

I did not touch the PCIE frenquency, is it needed?
Do I need to change the CPU voltage? What value would be right?

Thanks
 

MrCommunistGen

Distinguished
Jun 7, 2005
1,042
0
19,310
I assume you're using 800MHz RAM? If you're going for higher CPU clock speeds and you're having trouble with your RAM you can try loosening the timings to CAS5, raising the memory voltage, or dropping the memory multiplier by a notch (or any combination of the 3). Also, what CPU cooler are you using and what are your load and idle temps?

-mcg
 

Nuxly Stardust

Distinguished
Dec 5, 2008
6
0
18,510


A 667Mhz CAS 5 RAM that I want to increase to 800Mhz CAS 4, as the specs were wrong on the site where I bought it.



Idle: ~27°C
Load: ~50°C

I'm using the cooler provided by Intel right now and I'm gonna change it for the Zalman's CNPS9700NT soon.
 

Nuxly Stardust

Distinguished
Dec 5, 2008
6
0
18,510


It is set to Auto, and seem to stay around 1.850V.



I didn't want to try Prime95 before I get a new cooler, cause I've been told that 55°C is a bit too warm.
 

TRENDING THREADS