Tom's Hardware > Forum > Storage > Hard Disks > I cannot change the storage controller

I cannot change the storage controller

Forum Storage : Hard Disks - I cannot change the storage controller

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!

Ask the community Add a reply

Bottom Search this thread

I am in a situation where I changed the motherboard, processor and added a RAID (mirror) array. I used Norton Ghost to transfer all data from the old IDE drive to the SATA RAID array. I get the infamous blue screen. I am almost sure this is due to the storage controller. How can I update the storage controller on the array drives to get this back up and running?

Message edited by rootjd on 06-30-2009 at 04:02:42 AM

Add a reply

Did you look in the BIOS?

Message quoted 1 times

Reply to cmichael138

cmichael138 wrote :

Did you look in the BIOS?

Are you talking about setting the BIOS SATA mode to RAID? It's already set to that. I've tried running in IDE, ACHI, and RAID.

Reply to rootjd

There has got to be a way to update the drivers so that the computer boots with the new motherboard and controller.

I have the GA-73PVM-S2H motherboard which has an Nvidia chipset

I have also read the switching storage controllers sticky. It isn't helping me

Message edited by rootjd on 06-30-2009 at 04:01:58 AM

Reply to rootjd

I solved this.

Reply to rootjd

Ask the community Add a reply

Tom's Hardware > Forum > Storage > Hard Disks > I cannot change the storage controller

Go to:

Help |
Forum rules

There are 1191 identified and unidentified users. To see the list of identified users, Click here.

Page generated in 0.636 seconds

Focus On

I cannot change the storage controller

Forum Storage : Hard Disks - I cannot change the storage controller